Remove Bootup Sounds Topic is solved

Post your great articles here :)
Post Reply
User avatar
AxEgo
Experienced Member
Posts: 95
Joined: Tue Nov 27, 2018 5:34 am
Has thanked: 6 times
Been thanked: 28 times

Remove Bootup Sounds

#1

Post by AxEgo » Mon Dec 31, 2018 2:22 pm

To remove the music when ATVXperience boots up, you need to replace the boot video.

Requirements:
  1. ADB: https://androidmtk.com/download-minimal ... tboot-tool
  2. Silent Bootvideo: https://mega.nz/#!CH4REABD!s3T0EOdmcLpO ... YLxjBvVSUA
Instructions:
  1. Download and install ADB on your PC (if you don't already have it)
  2. Find the IP address of your ATVXperience box (Settings -> About -> Status)
  3. Open a Command Prompt
  4. In the command prompt, type adb connect xxx.xxx.xxx.xxx (Where xxx.xxx.xxx.xxx is your box IP address)
    If you get an 'unable to connect' error:
    1. Make sure your PC is on the same network as your ATVXperience box
    2. Make sure USB debugging is turned on in your Developer Settings
  5. Type adb shell mount -o rw,remount /system to change /system partition to read & write.
  6. Type adb push /path/to/downloaded/bootvideo /system/etc to overwrite the standard bootvideo with the silent version
  7. Type adb disconnect
That's all you need. Next time your box starts up there will be no boot up sounds.
X96 Mini - S905W - 2/16GB ATVXperience v2F

This topic has 9 replies

You must be a registered member and logged in to view the replies in this topic.


Register Login
 
Post Reply