[phpBB Debug] PHP Warning: in file [ROOT]/ext/spaceace/ajaxchat/controller/chat.php on line 220: Trying to access array offset on value of type bool
atvXperience : The Forum • [HELP] Weird S905 A95X box - No display but working
Page 1 of 5

[HELP] Weird S905 A95X box - No display but working

Posted: Mon Jan 28, 2019 6:57 pm
by Nayam
I have this s905 box, it looks like an a95x S905 2G+8G
Image

I downloaded some S905 roms and they flash successfully but when I connect the box, all I see is blue light but no display. The tv says output not detected. I don't have enough money to buy more s905 boxes so I have to put up with this.
Please help me fix it.

[HELP] Weird S905 A95X box - No display but working

Posted: Mon Jan 28, 2019 7:00 pm
by Nayam
Image

[HELP] Weird S905 A95X box - No display but working

Posted: Mon Jan 28, 2019 7:39 pm
by wrtease5865
try flashing the s905 pre beta that was made fir the atvx it works .dont no if it will help you but nothing to loose
or short the pins to flash again cant rember which pins

[HELP] Weird S905 A95X box - No display but working

Posted: Mon Jan 28, 2019 8:38 pm
by lindi909
Bro are you sure that you haven't bricked your device says the same thing happened to me when I bricked mine.

[HELP] Weird S905 A95X box - No display but working

Posted: Tue Jan 29, 2019 3:40 am
by AxEgo
This has happened to me with every rom I have tried to flash on my MXQPRO S905. The blue led stays on and nothing else happens. I've even left the box on overnight to see if it will boot, but nothing.

The only ROM I've successfully flashed is the Coolio rom from freaktab. There is a licence file you upload to the USB Burning Tool folder. Once I've installed coolio, I can then boot into reccovery, install twrp and restore my stock backup.

[HELP] Weird S905 A95X box - No display but working

Posted: Tue Jan 29, 2019 4:10 am
by ricklar
AxEgo wrote: Tue Jan 29, 2019 3:40 am This has happened to me with every rom I have tried to flash on my MXQPRO S905. The blue led stays on and nothing else happens.
I have heard that some boxes come with encrypted partitions where It will not let you burn new non-original firmware images into the TVbox. My only suggestion, which is a complete 'guess' since I have not run into the issue personally; "Is when using Amlogic USB Burning Tool, Click Force Erase All, Click Erase Bootloader, and Click OVERWRITE KEYS."
The only ROM I've successfully flashed is the Coolio rom from freaktab. There is a licence file you upload to the USB Burning Tool folder. Once I've installed coolio, I can then boot into reccovery, install twrp and restore my stock backup.
That would imply to me by default of common sense that original Key are not letting new firmware burn into device. But once you load an img with proper Key it lets you burn and manipulate device.

If somebody wants to test my theory, please let us know what occurs. Success or Failure.

[HELP] Weird S905 A95X box - No display but working

Posted: Tue Jan 29, 2019 5:41 am
by AxEgo
After flashing the s905 pre beta img, my box became totally unresponsive. USB Burning tool wouldn't recognise it and nothing would flash. I had to short the nand to get the box to flash the coolio rom. There are many posts on the web telling you which pins to short, most say you must short pin 7/8 or 1/2. Eventually I found this which worked on my box:
p201_NAND_pins.jpg
My board didn't have the circle marking on it, but the pins where in the correct place from the white dot on the chip.

[HELP] Weird S905 A95X box - No display but working

Posted: Tue Jan 29, 2019 5:43 am
by Nayam
AxEgo wrote: Tue Jan 29, 2019 3:40 am This has happened to me with every rom I have tried to flash on my MXQPRO S905. The blue led stays on and nothing else happens. I've even left the box on overnight to see if it will boot, but nothing.

The only ROM I've successfully flashed is the Coolio rom from freaktab. There is a licence file you upload to the USB Burning Tool folder. Once I've installed coolio, I can then boot into reccovery, install twrp and restore my stock backup.
Thanks, I thought the box I had was faulty because I never have encountered this problem on s912, s905w before.
I'll try the Coolio rom.

[HELP] Weird S905 A95X box - No display but working

Posted: Tue Jan 29, 2019 9:26 am
by Nayam
AxEgo wrote: Tue Jan 29, 2019 3:40 am This has happened to me with every rom I have tried to flash on my MXQPRO S905. The blue led stays on and nothing else happens. I've even left the box on overnight to see if it will boot, but nothing.

The only ROM I've successfully flashed is the Coolio rom from freaktab. There is a licence file you upload to the USB Burning Tool folder. Once I've installed coolio, I can then boot into reccovery, install twrp and restore my stock backup.
Flashed the Coolio Rom successfully, the box now shows only red light, not even blue so prolly unsupported.
I need to find a working rom.

[HELP] Weird S905 A95X box - No display but working

Posted: Tue Jan 29, 2019 12:03 pm
by lindi909
Nayam wrote: Tue Jan 29, 2019 9:26 am
AxEgo wrote: Tue Jan 29, 2019 3:40 am This has happened to me with every rom I have tried to flash on my MXQPRO S905. The blue led stays on and nothing else happens. I've even left the box on overnight to see if it will boot, but nothing.

The only ROM I've successfully flashed is the Coolio rom from freaktab. There is a licence file you upload to the USB Burning Tool folder. Once I've installed coolio, I can then boot into reccovery, install twrp and restore my stock backup.
Flashed the Coolio Rom successfully, the box now shows only red light, not even blue so prolly unsupported.
I need to find a working rom.
it looks like you have bricked your box bro while trying to install unsupported roms , the only way to unbrick it is to short pin it then installing original rom