Mecool KM9
- ricklar
- Moderator
- Posts: 889
- Joined: Fri Nov 30, 2018 10:30 pm
- Has thanked: 139 times
- Been thanked: 249 times
Mecool does weird things with its devices hardware and firmwares. Most likely a special port for the new V3 atvX firmware will have to be made special for those devices.
I did read on a FreakTab forum that the new Mecool KM3 official Google certified firmware was able to burn into the old KM9. Don't know if that also gives the old devices DRM L1. But it might be something I would try if I had that device.
BE KIND, BE NICE, BE RESPECTFUL TO OTHERS, RESPECT THE MODERATORS,
*IMPORTANT NOTE* ONLY PM MODERATORS OR DEVELOPERS AS A LAST RESORT!!!
My test device: H96 Pro+ 3gb/32gb DDR4 Plus own Tanix, Beelink, Alfawise, X96S, Odroid-N2, Khadas VIM3L, X3, ADT-3, X96-Air
GEARBEST.com
PLEASE ENJOY ATVX!
*IMPORTANT NOTE* ONLY PM MODERATORS OR DEVELOPERS AS A LAST RESORT!!!
My test device: H96 Pro+ 3gb/32gb DDR4 Plus own Tanix, Beelink, Alfawise, X96S, Odroid-N2, Khadas VIM3L, X3, ADT-3, X96-Air
GEARBEST.com
PLEASE ENJOY ATVX!
-
- Posts: 3
- Joined: Fri Dec 07, 2018 2:13 pm
I know what you mean I tried that but problem is that I don't have the voice remote odred when I get that then give it a tryricklar wrote: ↑Fri May 24, 2019 7:57 amMecool does weird things with its devices hardware and firmwares. Most likely a special port for the new V3 atvX firmware will have to be made special for those devices.
I did read on a FreakTab forum that the new Mecool KM3 official Google certified firmware was able to burn into the old KM9. Don't know if that also gives the old devices DRM L1. But it might be something I would try if I had that device.