[TWRP] S905X2 - TWRP Recovery 3.2.2

New and faster chipset from Amlogic
User avatar
ricklar
Moderator
Posts: 805
Joined: Fri Nov 30, 2018 10:30 pm
Has thanked: 120 times
Been thanked: 225 times

[TWRP] S905X2 - TWRP Recovery 3.2.2

#11

Post by ricklar » Sun Jun 16, 2019 8:00 am

@doktorspin thank you for info and testing that.
BE KIND, BE NICE, BE RESPECTFUL TO OTHERS, RESPECT THE MODERATORS,
*IMPORTANT NOTE* ONLY PM MODERATORS OR DEVELOPERS AS A LAST RESORT!!!

☢️ My test device: H96 Pro+ 3gb/32gb DDR4 ☢️ Plus own Tanix, Beelink, Alfawise, X96S
GEARBEST.com
PLEASE ENJOY ATVX!

steventan85
Posts: 2
Joined: Mon Jul 29, 2019 9:01 am

#12

Post by steventan85 » Thu Aug 08, 2019 7:42 am

glm47 wrote:
Fri May 24, 2019 10:05 pm
Can you use this on mecool km9 pro ?
I just bought a KM9 Pro and my seller told me its rooted. I still havent received it , so couldn't verify about it .

I google around and the answer is KM9 Pro not rooted but defaulted. and it cant be root because using android TV OS ....pls correct me if I'm wrong

User avatar
ricklar
Moderator
Posts: 805
Joined: Fri Nov 30, 2018 10:30 pm
Has thanked: 120 times
Been thanked: 225 times

#13

Post by ricklar » Fri Aug 09, 2019 11:52 am

steventan85 wrote:
Thu Aug 08, 2019 7:42 am
glm47 wrote:
Fri May 24, 2019 10:05 pm
Can you use this on mecool km9 pro ?
I just bought a KM9 Pro and my seller told me its rooted. I still havent received it , so couldn't verify about it .

I google around and the answer is KM9 Pro not rooted but defaulted. and it cant be root because using android TV OS ....pls correct me if I'm wrong
Your are correct, no Root Acccess when device is Official AndroidTV OS. Good luck with your device I hear the KM9 Pro is nice device to own.
BE KIND, BE NICE, BE RESPECTFUL TO OTHERS, RESPECT THE MODERATORS,
*IMPORTANT NOTE* ONLY PM MODERATORS OR DEVELOPERS AS A LAST RESORT!!!

☢️ My test device: H96 Pro+ 3gb/32gb DDR4 ☢️ Plus own Tanix, Beelink, Alfawise, X96S
GEARBEST.com
PLEASE ENJOY ATVX!

soldiaz
Expert Member
Posts: 271
Joined: Sat Sep 29, 2018 6:29 pm
Has thanked: 17 times
Been thanked: 14 times

#14

Post by soldiaz » Sat Aug 17, 2019 6:06 pm

Does this suit to any Amlogic soc? Including S905x, S905x2, S905w and S912?

soldiaz
Expert Member
Posts: 271
Joined: Sat Sep 29, 2018 6:29 pm
Has thanked: 17 times
Been thanked: 14 times

#15

Post by soldiaz » Tue Sep 24, 2019 3:33 pm

What about u213 refernce boards? I have HK1 PLAY, no firmware available. Howto make TWRP flashable backup? I could use TITANIUM since I have root access but in case it is bricked....I cant recover through Titanium

User avatar
em3ka
Moderator
Posts: 505
Joined: Sun Jul 15, 2018 11:43 am
Has thanked: 42 times
Been thanked: 132 times

#16

Post by em3ka » Tue Sep 24, 2019 6:52 pm

TWRP 3.2.2 universal* recovery
soldiaz wrote:
Sat Aug 17, 2019 6:06 pm
Does this suit to any Amlogic soc? Including S905x, S905x2, S905w and S912?
Yes, for all Amlogic SOC's.
soldiaz wrote:
Tue Sep 24, 2019 3:33 pm
How to make TWRP flashable backup?
* This is only a temporary boot TWRP, your stock recovery will be intact after a reboot.
If you brick your device and can not access recovery, then your TWRP backup won't be much help, its allways good to have stock firmware image ready. Make sure that all partitons (e.g. vendor) are saved.

User avatar
ricklar
Moderator
Posts: 805
Joined: Fri Nov 30, 2018 10:30 pm
Has thanked: 120 times
Been thanked: 225 times

#17

Post by ricklar » Wed Sep 25, 2019 4:25 am

soldiaz wrote:
Tue Sep 24, 2019 3:33 pm
What about u213 refernce boards? I have HK1 PLAY, no firmware available. Howto make TWRP flashable backup? I could use TITANIUM since I have root access but in case it is bricked....I cant recover through Titanium
You can make full android backup with LibreELEC-SDcard, and reinstall Android with LibreELEC even if Android won't boot. I have bricked Android and still LibreELEC works. But, I always just reload firmware with UBT software because I have devices all with available stock firmware images.

"u213" - if I had to guess, I would say stupid developer of stock ROM made error naming device u213 and not u211 like all other S905x2. Either way, you should be able to use the TWRP_3.2.3-1.img found on FreakTab for S905x2 to make a full backup, I used it for S905y2 (which has different reference code) and it worked to make and restore backups, just have to reload the TWRP everytime I want to use it, because it won't permanently install in recovery partition.
BE KIND, BE NICE, BE RESPECTFUL TO OTHERS, RESPECT THE MODERATORS,
*IMPORTANT NOTE* ONLY PM MODERATORS OR DEVELOPERS AS A LAST RESORT!!!

☢️ My test device: H96 Pro+ 3gb/32gb DDR4 ☢️ Plus own Tanix, Beelink, Alfawise, X96S
GEARBEST.com
PLEASE ENJOY ATVX!

soldiaz
Expert Member
Posts: 271
Joined: Sat Sep 29, 2018 6:29 pm
Has thanked: 17 times
Been thanked: 14 times

#18

Post by soldiaz » Wed Sep 25, 2019 5:18 pm

I used to put recovery.img to root of sd card and power on the device while holding the reset button inside AV hole.

Device alsways boots into stock recovery.....this method does not work any more?

Ill try applying update from SD card through recovery now

soldiaz
Expert Member
Posts: 271
Joined: Sat Sep 29, 2018 6:29 pm
Has thanked: 17 times
Been thanked: 14 times

#19

Post by soldiaz » Wed Sep 25, 2019 5:42 pm

Nayam wrote:
Thu May 09, 2019 6:56 pm
TWRP_322 (1).zip
I can confirm this recovery is the only one which can be launched from stock recovery. Even though I am not able to backup system partition nor is it possible to backup vendor partition. Kindly check attached pictures. Maybe someone can figure out why...I even tried out to mount system through stock recovery (there is one menu point)

soldiaz
Expert Member
Posts: 271
Joined: Sat Sep 29, 2018 6:29 pm
Has thanked: 17 times
Been thanked: 14 times

#20

Post by soldiaz » Wed Sep 25, 2019 5:56 pm

20190925_193039_small.jpg
And then the recovery which could be launched but neither system nor vendor partition is present:
20190925_192746_small.jpg
You do not have the required permissions to view the files attached to this post.

Post Reply