Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
TX3 Mini, X96 Mini, W95 to name a few...
1 post • Page 1 of 1
Hello, this is my first post in the forum so I hope I am submitting the the right section. I have come today with a problem that has been with me for well over a month and a half. It all started when I installed a dual-boot libreelec firmware to it from the stock recovery. It gave a black screen and the boot text in the small display. I first tried the SD card method, but for some reason it was only detected on my PC (fully functional btw). So then I next tried it with my USB to USB cable I got from Amazon. After loading up the image into USB burning tool, I hit start and then inserted the cable with the TV box reset button pressed. But for some reason, I either got the 0x30201004 error or the 0x10105002 error. I tried everything, atvx firmware, stock firmware, etc. I followed all the directions in the videos I watched, but they didn't seem to work. And I am 99% sure it is NOT a fake box, since it seems to check out after I took a look inside it. So what should I do? Is it bricked?