[HELP] How to unbrick TX3 Mini (Short pin photo included)  [SOLVED]

TX3 Mini, X96 Mini, W95 to name a few...
Post Reply
justin10
Verified Member
Posts: 14
Joined: Sat Nov 07, 2020 4:56 pm
Has thanked: 3 times

[HELP] How to unbrick TX3 Mini (Short pin photo included)

#1

Post by justin10 » Sun Nov 29, 2020 6:50 am

I just got my TX 3 MINI S905W yesterday, everything works fine till i flashed atv v4... Now it won't boot up, nor connect to my laptop.
It will only have red light on when DC connected.

I've tried press reset button and connect to PC, or tried usd USB card burner on an SD card. None of them were able to un-brick.
https://www.youtube.com/watch?v=FlH5tpd7M1Y

I was looking for short pins as well, but all the tutorials are about CS_905W_TX_V1.1 or 1.2, mine is CS_905W_TX_V1.6....???
And I was not able to find the stock rom for this... anyone?

Please see below board photo:
Image

Back side (the top left yellowish square circle is the reset button) :
Image

UPDATE:
short pins, make sure to use short pins, then connect USB to PC:
Image
Last edited by justin10 on Mon Nov 30, 2020 1:40 pm, edited 4 times in total.

This topic has 22 replies

You must be a registered member and logged in to view the replies in this topic.


Register Login
 
Post Reply