[HELP] Mecool M8S PRO W v2.3 brick, firmware needed ( if any )

[Saleen]

Sadly, the same thing happens, getting stuck at ~2-3% ( upgrading ). I don't think there's anything left to try for this tvbox... Ty anyway for your time and the help.

I need uart log. Create a CoreElec SDcard, short pins 29-30 and try to boot CoreElec, watching what happens..

I tried to install this CoreElec but it doesn't work. I did everything from https://coreelec.org/ install guide ( M8S PRO W img + gxl_p281_2g renaming ) but the SD card isn't booting when I'm shorting those pins.

[bumerc]

Sadly, the same thing happens, getting stuck at ~2-3% ( upgrading ). I don't think there's anything left to try for this tvbox... Ty anyway for your time and the help.

I need uart log. Create a CoreElec SDcard, short pins 29-30 and try to boot CoreElec, watching what happens..

I tried to install this CoreElec but it doesn't work. I did everything from https://coreelec.org/ install guide ( M8S PRO W img + gxl_p281_2g renaming ) but the SD card isn't booting when I'm shorting those pins.

Try USB stick, some manufacturers disable SD card in BL1, otherwise please post uart log

[Saleen]

I need uart log. Create a CoreElec SDcard, short pins 29-30 and try to boot CoreElec, watching what happens..

I tried to install this CoreElec but it doesn't work. I did everything from https://coreelec.org/ install guide ( M8S PRO W img + gxl_p281_2g renaming ) but the SD card isn't booting when I'm shorting those pins.

Try USB stick, some manufacturers disable SD card in BL1, otherwise please post uart log

I tried booting Core Elec from usb stick but nothing happens and I don't have an uart board in order to connect it to the tvbox for getting the logs...

[bumerc]

I don't have an uart board in order to connect it to the tvbox for getting the logs...

This is bad. I compile a new Pie-Bootloader SDcard version for your device and create a complete CoreElec.img (Bootloader + IMG) for direct booting via SD card, let's see what happens

[Saleen]

. I compile a new Pie-Bootloader SDcard version for your device and create a complete CoreElec.img (Bootloader + IMG) for direct booting via

Hello, please let me know if if and when you create it. This will probably be the last shot for this tv box.

[Saleen]

I don't have an uart board in order to connect it to the tvbox for getting the logs...

This is bad. I compile a new Pie-Bootloader SDcard version for your device and create a complete CoreElec.img (Bootloader + IMG) for direct booting via SD card, let's see what happens

Hello, any update on that rom ?

[bumerc]

For that, I need a little more time, which I do not have at the moment because of pie project

[Saleen]

For that, I need a little more time, which I do not have at the moment because of pie project

Ok, no problem, I'll wait. Meanwhile, I'm still waiting for Gearbest to refund me, it's been a week and the refund it's still pending. Will have to check for something a little better this time than the M8S Pro w.

[Saleen]

For that, I need a little more time, which I do not have at the moment because of pie project

Hello, do you have any update?

[bumerc]

Hello, do you have any update?

Hi, i hope you got a uart adapter during this time, because without a log, it's just a puzzle game. I will try to build a single trial version in the late evening..