I accidently tried installing atvxperience v2FF with the SD burner, and during installation on the box, the green bar moves to about 5% and then an android logo with a red X shows up. If I remove the SD Card, the system gets stuck on the atvxperience logo screen. I have already tried installing v2C, but ran into the same issue.
I also can't use the USB burning tool as the box is not detected on my PC at all, no prompt for driver installation or anything; what can I do now?
X96 Mini stuck on boot screen
- ricklar
- Moderator
- Posts: 889
- Joined: Fri Nov 30, 2018 10:30 pm
- Has thanked: 139 times
- Been thanked: 249 times
"Short the Pins" of eMMC Nand chip to get box to connect to PC and use USB Burning Tool and install firmware
BE KIND, BE NICE, BE RESPECTFUL TO OTHERS, RESPECT THE MODERATORS,
*IMPORTANT NOTE* ONLY PM MODERATORS OR DEVELOPERS AS A LAST RESORT!!!
My test device: H96 Pro+ 3gb/32gb DDR4 Plus own Tanix, Beelink, Alfawise, X96S, Odroid-N2, Khadas VIM3L, X3, ADT-3, X96-Air
GEARBEST.com
PLEASE ENJOY ATVX!
*IMPORTANT NOTE* ONLY PM MODERATORS OR DEVELOPERS AS A LAST RESORT!!!
My test device: H96 Pro+ 3gb/32gb DDR4 Plus own Tanix, Beelink, Alfawise, X96S, Odroid-N2, Khadas VIM3L, X3, ADT-3, X96-Air
GEARBEST.com
PLEASE ENJOY ATVX!
-
- Posts: 2
- Joined: Wed Jun 19, 2019 6:59 pm
I now get this error:
is the box encrypted?
Code: Select all
[17:05:48 189][HUB2-6][Inf]--------------ERASE BOOTLOADER------------
[17:05:48 689][HUB2-6][Inf]--2-4-0-0
[17:05:48 689][HUB2-6][Inf]-------------Download DDR.USB-----------
[17:05:48 689][HUB2-6][Inf]--Close device handle 0x00000c24
[17:05:48 740][HUB2-6][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#6&26c79fad&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x00000c24
[17:05:48 790][HUB2-6][Inf]--2-4-0-0
[17:05:48 790][HUB2-6][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[17:05:49 290][HUB2-6][Inf]--Control write pll reg1 0xd9000000:0x00005183
[17:05:49 791][HUB2-6][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[17:05:50 291][HUB2-6][Inf]--Control write pll reg1 0xd9000000:0x00005183
[17:05:50 792][HUB2-6][Inf]--Write initial succeed
[17:05:50 792][HUB2-6][Inf]--Upload encrypt at 0xc8100228
[17:05:50 792][HUB2-6][Inf]--ulValue = 0xbdfc31bc
[17:05:50 792][HUB2-6][Inf]--File change to DDR_ENC.USB
[17:05:50 792][HUB2-6][Inf]--Read encrypt value succeed
[17:05:50 792][Global][Err]--DDR_ENC.USB
[17:05:50 792][Global][Err]--DDR_ENC.USB
[17:05:50 792][HUB2-6][Err]--Read item data error, code -1
[17:05:50 792][Global][Err]--DDR_ENC.USB
[17:05:50 828][HUB2-6][Err]--[0x10103005]Romcode/Initialize DDR/Download buffer/Read item data failed
[17:05:50 828][HUB2-6][Inf]--Close device handle 0x00000c24
-
- Administrator & Developer
- Posts: 1551
- Joined: Tue Oct 02, 2018 6:19 pm
- Has thanked: 211 times
- Been thanked: 334 times
Yesyeeno wrote: ↑Fri Jun 21, 2019 11:19 pm I now get this error:is the box encrypted?Code: Select all
[17:05:48 189][HUB2-6][Inf]--------------ERASE BOOTLOADER------------ [17:05:48 689][HUB2-6][Inf]--2-4-0-0 [17:05:48 689][HUB2-6][Inf]-------------Download DDR.USB----------- [17:05:48 689][HUB2-6][Inf]--Close device handle 0x00000c24 [17:05:48 740][HUB2-6][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#6&26c79fad&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x00000c24 [17:05:48 790][HUB2-6][Inf]--2-4-0-0 [17:05:48 790][HUB2-6][Inf]--Control write pll reg1 0xd9000000:0x000000b1 [17:05:49 290][HUB2-6][Inf]--Control write pll reg1 0xd9000000:0x00005183 [17:05:49 791][HUB2-6][Inf]--Control write pll reg1 0xd9000000:0x000000b1 [17:05:50 291][HUB2-6][Inf]--Control write pll reg1 0xd9000000:0x00005183 [17:05:50 792][HUB2-6][Inf]--Write initial succeed [17:05:50 792][HUB2-6][Inf]--Upload encrypt at 0xc8100228 [17:05:50 792][HUB2-6][Inf]--ulValue = 0xbdfc31bc [17:05:50 792][HUB2-6][Inf]--File change to DDR_ENC.USB [17:05:50 792][HUB2-6][Inf]--Read encrypt value succeed [17:05:50 792][Global][Err]--DDR_ENC.USB [17:05:50 792][Global][Err]--DDR_ENC.USB [17:05:50 792][HUB2-6][Err]--Read item data error, code -1 [17:05:50 792][Global][Err]--DDR_ENC.USB [17:05:50 828][HUB2-6][Err]--[0x10103005]Romcode/Initialize DDR/Download buffer/Read item data failed [17:05:50 828][HUB2-6][Inf]--Close device handle 0x00000c24