I think my box is brick its alway show black screen and lcd always show “boot” red led is show at back
I try to flash with usb burning tool its error with code 0x32030201 uboot get result disk initial error
So i make burncard and try too boot it always black screen and not respond
I use firmware in this forumviewtopic.php?f=2&t=582&start=20
thank for help and sorry for bad english
this is my box board
[HELP] need help on tx3 mini brick
- em3ka
- Moderator
- Posts: 1835
- Joined: Sun Jul 15, 2018 11:43 am
- Has thanked: 108 times
- Been thanked: 370 times
You have newest TX3 mini box with different RAM - revision 1.3 motherboard.
Flash only this rom from 4PDA (atvX v2H .img or .zip)
https://4pda.ru/forum/index.php?showtop ... ry86559322
Flash only this rom from 4PDA (atvX v2H .img or .zip)
https://4pda.ru/forum/index.php?showtop ... ry86559322
-
- Verified Member
- Posts: 11
- Joined: Sat Aug 03, 2019 3:40 pm
- Has thanked: 7 times
[mention]em3ka[/mention]thank you sir i will try
is this link right?http://4pda.ru/forum/index.php?showtopic=910528&st=120 your link doesnt work
so i download and flash with burnning tool? and this gonna show error uboot like before
sry for a lot of question
is this link right?http://4pda.ru/forum/index.php?showtopic=910528&st=120 your link doesnt work
so i download and flash with burnning tool? and this gonna show error uboot like before
sry for a lot of question
- em3ka
- Moderator
- Posts: 1835
- Joined: Sun Jul 15, 2018 11:43 am
- Has thanked: 108 times
- Been thanked: 370 times
FW is for rev1.3 motherboard, should work...northenlight wrote: ↑Sun Aug 04, 2019 7:06 am your link doesnt work (corrected now)
so i download and flash with burnning tool? and this gonna show error uboot like before
-
- Verified Member
- Posts: 11
- Joined: Sat Aug 03, 2019 3:40 pm
- Has thanked: 7 times
its error at u boot againem3ka wrote: ↑Sun Aug 04, 2019 7:40 amFW is for rev1.3 motherboard, should work...northenlight wrote: ↑Sun Aug 04, 2019 7:06 am your link doesnt work (corrected now)
so i download and flash with burnning tool? and this gonna show error uboot like before
-
- Verified Member
- Posts: 11
- Joined: Sat Aug 03, 2019 3:40 pm
- Has thanked: 7 times
-
- Verified Member
- Posts: 11
- Joined: Sat Aug 03, 2019 3:40 pm
- Has thanked: 7 times
i try 2h with sd boot but now its loop on upgrading screen
- ricklar
- Moderator
- Posts: 889
- Joined: Fri Nov 30, 2018 10:30 pm
- Has thanked: 139 times
- Been thanked: 249 times
Find the Tanix official firmware online for your tvbox and burn that with USB Burning Tool.northenlight wrote: ↑Sun Aug 04, 2019 8:06 am i try 2h with sd boot but now its loop on upgrading screen
BE KIND, BE NICE, BE RESPECTFUL TO OTHERS, RESPECT THE MODERATORS,
*IMPORTANT NOTE* ONLY PM MODERATORS OR DEVELOPERS AS A LAST RESORT!!!
My test device: H96 Pro+ 3gb/32gb DDR4 Plus own Tanix, Beelink, Alfawise, X96S, Odroid-N2, Khadas VIM3L, X3, ADT-3, X96-Air
GEARBEST.com
PLEASE ENJOY ATVX!
*IMPORTANT NOTE* ONLY PM MODERATORS OR DEVELOPERS AS A LAST RESORT!!!
My test device: H96 Pro+ 3gb/32gb DDR4 Plus own Tanix, Beelink, Alfawise, X96S, Odroid-N2, Khadas VIM3L, X3, ADT-3, X96-Air
GEARBEST.com
PLEASE ENJOY ATVX!
-
- Verified Member
- Posts: 11
- Joined: Sat Aug 03, 2019 3:40 pm
- Has thanked: 7 times
i have try 20180109 and 20171220 it same problem tooricklar wrote: ↑Sun Aug 04, 2019 4:27 pmFind the Tanix official firmware online for your tvbox and burn that with USB Burning Tool.northenlight wrote: ↑Sun Aug 04, 2019 8:06 am i try 2h with sd boot but now its loop on upgrading screen