Page 1 of 2
[HELP] Romcode/Initialize DDR/Download buffer/Read item data failed
Posted: Wed Sep 04, 2019 8:44 pm
by rmallia
Hi Getting this error on trying to flash... anyone knows why please? below full log:
[22:26:04 764][HUB1-2][Inf]--Start burning...
[22:26:04 826][HUB1-2][Inf]--------------ERASE BOOTLOADER------------
[22:26:04 826][HUB1-2][Inf]--2-2-0-0
[22:26:04 826][HUB1-2][Inf]-------------Download DDR.USB-----------
[22:26:04 826][HUB1-2][Inf]--2-2-0-0
[22:26:04 826][HUB1-2][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[22:26:05 333][HUB1-2][Inf]--Control write pll reg1 0xd9000000:0x00005183
[22:26:05 834][HUB1-2][Inf]--Write initial succeed
[22:26:05 834][HUB1-2][Inf]--Upload encrypt at 0xc8100228
[22:26:05 834][HUB1-2][Inf]--ulValue = 0xbdfc31bc
[22:26:05 834][HUB1-2][Inf]--File change to DDR_ENC.USB
[22:26:05 834][HUB1-2][Inf]--Read encrypt value succeed
[22:26:05 834][Global][Err]--DDR_ENC.USB
[22:26:05 834][Global][Err]--DDR_ENC.USB
[22:26:05 834][HUB1-2][Err]--Read item data error, code -1
[22:26:05 834][Global][Err]--DDR_ENC.USB
[22:26:05 834][HUB1-2][Err]--[0x10103005]Romcode/Initialize DDR/Download buffer/Read item data failed
[22:26:05 834][HUB1-2][Inf]--Close device handle 0x00000a3c
[HELP] Romcode/Initialize DDR/Download buffer/Read item data failed
Posted: Wed Sep 04, 2019 9:49 pm
by bumerc
The bootloader is encrypted. You can only install original FW from the manufacturer.
[DISCUSSION] [DISCUSSÃO] me ajudem sou brasileiro
Posted: Wed Oct 23, 2019 12:10 pm
by jeffersonfarofa
could you help me with this board. does not install any rom. she came in a t10.
[DISCUSSION] [DISCUSSÃO] me ajudem sou brasileiro
Posted: Wed Oct 23, 2019 1:39 pm
by jeffersonfarofa
[10:33:34 584][HUB2-7][Inf]--Update device path
[10:33:34 584][Global][Inf]--Update HUB2-8
[10:33:34 584][HUB2-8][Inf]--Update device path
[10:33:34 584][Global][Inf]--Scan end
[10:33:34 634][HUB2-5][Inf]--------------ERASE BOOTLOADER------------
[10:33:34 734][HUB2-5][Inf]--start SendIdentifyCmd
[10:33:34 734][HUB2-5][Inf]--2-4-0-0
[10:33:34 734][HUB2-5][Inf]-------------Download DDR.USB-----------
[10:33:34 734][HUB2-5][Inf]--Close device handle 0x00000524
[10:33:34 784][HUB2-5][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#6&61bf49f&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x00000524
[10:33:34 834][HUB2-5][Inf]--2-4-0-0
[10:33:34 834][HUB2-5][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[10:33:35 335][HUB2-5][Inf]--Control write pll reg1 0xd9000000:0x00005183
[10:33:35 835][HUB2-5][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[10:33:36 335][HUB2-5][Inf]--Control write pll reg1 0xd9000000:0x00005183
[10:33:36 835][HUB2-5][Inf]--Write initial succeed
[10:33:36 835][HUB2-5][Inf]--Upload encrypt at 0xc8100228
[10:33:36 835][HUB2-5][Inf]--ulValue = 0xbdfc31bc
[10:33:36 835][HUB2-5][Inf]--File change to DDR_ENC.USB
[10:33:36 835][HUB2-5][Inf]--Read encrypt value succeed
[10:33:36 835][HUB2-5][Inf]--Download DDR_ENC.USB,size: 0!
[10:33:36 835][Global][Err]--DDR_ENC.USB
[10:33:36 835][Global][Err]--DDR_ENC.USB
[10:33:36 835][HUB2-5][Err]--Read item data error, code -1
[10:33:36 835][Global][Err]--DDR_ENC.USB
[10:33:36 916][HUB2-5][Err]--[0x10103005]Romcode/Initialize DDR/Download buffer/Read item data failed
[10:33:36 917][HUB2-5][Inf]--Close device handle 0x00000524
[HELP] Romcode/Initialize DDR/Download buffer/Read item data failed
Posted: Wed Oct 23, 2019 2:47 pm
by em3ka
[mention]jeffersonfarofa[/mention]
bumerc wrote: ↑Wed Sep 04, 2019 9:49 pm
The bootloader is encrypted. You can only install original FW from the manufacturer.
[HELP] Romcode/Initialize DDR/Download buffer/Read item data failed
Posted: Wed Oct 23, 2019 2:54 pm
by jeffersonfarofa
know where to find
[HELP] Romcode/Initialize DDR/Download buffer/Read item data failed
Posted: Wed Oct 23, 2019 3:06 pm
by jeffersonfarofa
@em3ka do you know where I find it please
[HELP] Romcode/Initialize DDR/Download buffer/Read item data failed
Posted: Wed Oct 23, 2019 5:23 pm
by em3ka
Sorry, you are owner of a "sell quick and forget about" devices, so there is no support whatsoever.
[HELP] Romcode/Initialize DDR/Download buffer/Read item data failed
Posted: Mon Nov 18, 2019 7:44 pm
by vladakru
hi i have same board.
one time I successfully completed a usb burning tool but after that successful flash, box was dead.
here's the log of that "successful" flashing
Code: Select all
[19:22:28 481][Global][Inf]--User click start button
[19:22:28 481][Global][Inf]--SetErase
[19:22:28 481][Global][Inf]--Enable burning 1
[19:22:28 481][Global][Inf]--Scan usb device
[19:22:28 481][Global][Inf]--Aml scan WorldCup Device
[19:22:28 481][Global][Inf]--Host: Standard OpenHCD USB Host Controller
[19:22:28 481][Global][Inf]--DevPath:\\?\pci#ven_1002&dev_4389&subsys_0e0c105b&rev_00#3&267a616a&0&9a#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[19:22:28 481][Global][Inf]---->Roothub:USB#ROOT_HUB#4&2e6e074&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[19:22:28 481][Global][Inf]-------->[Port0]NoDeviceConnected
[19:22:28 481][Global][Inf]-------->[Port1]NoDeviceConnected
[19:22:28 481][Global][Inf]--Host: Standard OpenHCD USB Host Controller
[19:22:28 481][Global][Inf]--DevPath:\\?\pci#ven_1002&dev_438a&subsys_0e0c105b&rev_00#3&267a616a&0&9b#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[19:22:28 481][Global][Inf]---->Roothub:USB#ROOT_HUB#4&e4b48c7&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[19:22:28 481][Global][Inf]-------->[Port0]NoDeviceConnected
[19:22:28 481][Global][Inf]-------->[Port1]NoDeviceConnected
[19:22:28 481][Global][Inf]--Host: Standard OpenHCD USB Host Controller
[19:22:28 481][Global][Inf]--DevPath:\\?\pci#ven_1002&dev_438b&subsys_0e0c105b&rev_00#3&267a616a&0&9c#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[19:22:28 481][Global][Inf]---->Roothub:USB#ROOT_HUB#4&23ba913a&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[19:22:28 481][Global][Inf]-------->[Port0]NoDeviceConnected
[19:22:28 481][Global][Inf]-------->[Port1]NoDeviceConnected
[19:22:28 481][Global][Inf]--Host: Standard OpenHCD USB Host Controller
[19:22:28 481][Global][Inf]--DevPath:\\?\pci#ven_1002&dev_4387&subsys_0e0c105b&rev_00#3&267a616a&0&98#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[19:22:28 481][Global][Inf]---->Roothub:USB#ROOT_HUB#4&1c196ffd&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[19:22:28 481][Global][Inf]-------->[Port0]NoDeviceConnected
[19:22:28 481][Global][Inf]-------->[Port1]NoDeviceConnected
[19:22:28 481][Global][Inf]--Host: Standard OpenHCD USB Host Controller
[19:22:28 481][Global][Inf]--DevPath:\\?\pci#ven_1002&dev_4388&subsys_0e0c105b&rev_00#3&267a616a&0&99#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[19:22:28 481][Global][Inf]---->Roothub:USB#ROOT_HUB#4&34f0a27d&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[19:22:28 481][Global][Inf]-------->[Port0]NoDeviceConnected
[19:22:28 481][Global][Inf]-------->[Port1]Other device
[19:22:28 481][Global][Inf]--Host: Standard Enhanced PCI to USB Host Controller
[19:22:28 481][Global][Inf]--DevPath:\\?\pci#ven_1002&dev_4386&subsys_0e0c105b&rev_00#3&267a616a&0&9d#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[19:22:28 481][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&24f6b0d1&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[19:22:28 481][Global][Inf]-------->[Port0]NoDeviceConnected
[19:22:28 481][Global][Inf]-------->[Port1]NoDeviceConnected
[19:22:28 481][Global][Inf]-------->[Port2]NoDeviceConnected
[19:22:28 481][Global][Inf]-------->[Port3]NoDeviceConnected
[19:22:28 481][Global][Inf]-------->[Port4]NoDeviceConnected
[19:22:28 481][Global][Inf]-------->[Port5]NoDeviceConnected
[19:22:28 481][Global][Inf]-------->[Port6]NoDeviceConnected
[19:22:28 481][Global][Inf]-------->[Port7]NoDeviceConnected
[19:22:28 481][Global][Inf]-------->[Port8]NoDeviceConnected
[19:22:28 481][Global][Inf]-------->[Port9]NoDeviceConnected
[19:22:28 481][Global][Inf]--Scan USB host controller complete
[19:22:28 481][Global][Inf]--Update data center with HubMap
[19:22:28 481][Global][Inf]--Update hub6 device data
[19:22:28 481][Global][Inf]--Update HUB6-1
[19:22:28 481][HUB6-1][Inf]--Update device path
[19:22:28 481][Global][Inf]--Update HUB6-2
[19:22:28 481][HUB6-2][Inf]--Update device path
[19:22:28 481][Global][Inf]--Update HUB6-3
[19:22:28 481][HUB6-3][Inf]--Update device path
[19:22:28 481][Global][Inf]--Update HUB6-4
[19:22:28 481][HUB6-4][Inf]--Update device path
[19:22:28 481][Global][Inf]--Update HUB6-5
[19:22:28 481][HUB6-5][Inf]--Update device path
[19:22:28 481][Global][Inf]--Update HUB6-6
[19:22:28 481][HUB6-6][Inf]--Update device path
[19:22:28 481][Global][Inf]--Update HUB6-7
[19:22:28 481][HUB6-7][Inf]--Update device path
[19:22:28 481][Global][Inf]--Update HUB6-8
[19:22:28 481][HUB6-8][Inf]--Update device path
[19:22:28 481][Global][Inf]--Update HUB6-9
[19:22:28 481][HUB6-9][Inf]--Update device path
[19:22:28 481][Global][Inf]--Update HUB6-10
[19:22:28 481][HUB6-10][Inf]--Update device path
[19:22:39 772][Global][Inf]--Catch DBT_DEVICEARRIVAL
[19:22:39 772][Global][Inf]--Scan usb device
[19:22:39 772][Global][Inf]--Aml scan WorldCup Device
[19:22:39 774][Global][Inf]--Host: Standard OpenHCD USB Host Controller
[19:22:39 774][Global][Inf]--DevPath:\\?\pci#ven_1002&dev_4389&subsys_0e0c105b&rev_00#3&267a616a&0&9a#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[19:22:39 774][Global][Inf]---->Roothub:USB#ROOT_HUB#4&2e6e074&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[19:22:39 774][Global][Inf]-------->[Port0]NoDeviceConnected
[19:22:39 774][Global][Inf]-------->[Port1]NoDeviceConnected
[19:22:39 775][Global][Inf]--Host: Standard OpenHCD USB Host Controller
[19:22:39 775][Global][Inf]--DevPath:\\?\pci#ven_1002&dev_438a&subsys_0e0c105b&rev_00#3&267a616a&0&9b#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[19:22:39 775][Global][Inf]---->Roothub:USB#ROOT_HUB#4&e4b48c7&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[19:22:39 776][Global][Inf]-------->[Port0]NoDeviceConnected
[19:22:39 776][Global][Inf]-------->[Port1]NoDeviceConnected
[19:22:39 777][Global][Inf]--Host: Standard OpenHCD USB Host Controller
[19:22:39 777][Global][Inf]--DevPath:\\?\pci#ven_1002&dev_438b&subsys_0e0c105b&rev_00#3&267a616a&0&9c#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[19:22:39 777][Global][Inf]---->Roothub:USB#ROOT_HUB#4&23ba913a&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[19:22:39 777][Global][Inf]-------->[Port0]NoDeviceConnected
[19:22:39 777][Global][Inf]-------->[Port1]NoDeviceConnected
[19:22:39 778][Global][Inf]--Host: Standard OpenHCD USB Host Controller
[19:22:39 778][Global][Inf]--DevPath:\\?\pci#ven_1002&dev_4387&subsys_0e0c105b&rev_00#3&267a616a&0&98#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[19:22:39 778][Global][Inf]---->Roothub:USB#ROOT_HUB#4&1c196ffd&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[19:22:39 778][Global][Inf]-------->[Port0]NoDeviceConnected
[19:22:39 778][Global][Inf]-------->[Port1]NoDeviceConnected
[19:22:39 779][Global][Inf]--Host: Standard OpenHCD USB Host Controller
[19:22:39 779][Global][Inf]--DevPath:\\?\pci#ven_1002&dev_4388&subsys_0e0c105b&rev_00#3&267a616a&0&99#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[19:22:39 779][Global][Inf]---->Roothub:USB#ROOT_HUB#4&34f0a27d&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[19:22:39 779][Global][Inf]-------->[Port0]NoDeviceConnected
[19:22:39 779][Global][Inf]-------->[Port1]Other device
[19:22:39 780][Global][Inf]--Host: Standard Enhanced PCI to USB Host Controller
[19:22:39 780][Global][Inf]--DevPath:\\?\pci#ven_1002&dev_4386&subsys_0e0c105b&rev_00#3&267a616a&0&9d#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[19:22:39 780][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&24f6b0d1&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[19:22:39 780][Global][Inf]-------->[Port0]\\?\usb#vid_1b8e&pid_c003#5&1c9bd01c&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[19:22:39 780][Global][Inf]-------->[Port1]NoDeviceConnected
[19:22:39 781][Global][Inf]-------->[Port2]NoDeviceConnected
[19:22:39 781][Global][Inf]-------->[Port3]NoDeviceConnected
[19:22:39 781][Global][Inf]-------->[Port4]NoDeviceConnected
[19:22:39 781][Global][Inf]-------->[Port5]NoDeviceConnected
[19:22:39 781][Global][Inf]-------->[Port6]NoDeviceConnected
[19:22:39 781][Global][Inf]-------->[Port7]NoDeviceConnected
[19:22:39 781][Global][Inf]-------->[Port8]NoDeviceConnected
[19:22:39 781][Global][Inf]-------->[Port9]NoDeviceConnected
[19:22:39 781][Global][Inf]--Scan USB host controller complete
[19:22:39 781][Global][Inf]--Update data center with HubMap
[19:22:39 781][Global][Inf]--Update hub6 device data
[19:22:39 781][Global][Inf]--Update HUB6-1 \\?\usb#vid_1b8e&pid_c003#5&1c9bd01c&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[19:22:39 781][HUB6-1][Inf]--Update device path
[19:22:39 781][Global][Inf]--Update HUB6-2
[19:22:39 781][HUB6-2][Inf]--Update device path
[19:22:39 781][Global][Inf]--Update HUB6-3
[19:22:39 781][HUB6-3][Inf]--Update device path
[19:22:39 781][Global][Inf]--Update HUB6-4
[19:22:39 781][HUB6-4][Inf]--Update device path
[19:22:39 781][Global][Inf]--Update HUB6-5
[19:22:39 781][HUB6-5][Inf]--Update device path
[19:22:39 781][Global][Inf]--Update HUB6-6
[19:22:39 781][HUB6-6][Inf]--Update device path
[19:22:39 781][Global][Inf]--Update HUB6-7
[19:22:39 781][HUB6-7][Inf]--Update device path
[19:22:39 782][Global][Inf]--Update HUB6-8
[19:22:39 782][HUB6-8][Inf]--Update device path
[19:22:39 782][Global][Inf]--Update HUB6-9
[19:22:39 782][HUB6-9][Inf]--Update device path
[19:22:39 782][Global][Inf]--Update HUB6-10
[19:22:39 782][HUB6-10][Inf]--Update device path
[19:22:39 816][Global][Inf]--Burning thread HUB6-1 start
[19:22:39 869][HUB6-1][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#5&1c9bd01c&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x00000824
[19:22:39 925][HUB6-1][Inf]--Connect path=Standard Enhanced PCI to USB Host Controller/P0/P0
[19:22:39 925][HUB6-1][Inf]--Start burning...
[19:22:39 976][HUB6-1][Inf]--------------ERASE BOOTLOADER------------
[19:22:39 976][HUB6-1][Inf]-------------Download DDR.USB-----------
[19:22:39 976][HUB6-1][Inf]--0-7-0-16
[19:22:39 976][HUB6-1][Inf]--No need download
[19:22:39 976][HUB6-1][Inf]-------------Download UBOOT.USB-----------
[19:22:39 976][HUB6-1][Inf]--0-7-0-16
[19:22:39 976][HUB6-1][Inf]--No need download
[19:22:39 976][HUB6-1][Inf]-- low_power
[19:22:39 981][HUB6-1][Inf]--Send command success
[19:22:39 986][HUB6-1][Inf]--Read command status success
[19:22:39 986][HUB6-1][Inf]-------------Download meson1.dtb-----------
[19:22:39 986][HUB6-1][Inf]--0-7-0-16
[19:22:39 986][HUB6-1][Inf]-- download mem dtb normal 88064
[19:22:39 986][HUB6-1][Inf]--Send download command success
[19:22:40 001][HUB6-1][Inf]--Read command status success
[19:22:40 017][HUB6-1][Inf]--Transfer complete
[19:22:40 017][HUB6-1][Inf]--Send download get_status command succeed
[19:22:40 024][HUB6-1][Inf]--get_status success
[19:22:40 535][HUB6-1][Inf]-------------ERASE FLASH-----------
[19:22:40 535][HUB6-1][Inf]--disk_initial 0
[19:22:40 535][HUB6-1][Inf]--Send command success
[19:22:40 758][HUB6-1][Inf]--Read command status success
[19:22:40 758][HUB6-1][Inf]-------------Download _aml_dtb.PARTITION-----------
[19:22:40 758][HUB6-1][Inf]--0-7-0-16
[19:22:40 758][HUB6-1][Inf]--download store _aml_dtb normal 88064
[19:22:40 758][HUB6-1][Inf]--Send download command success
[19:22:40 774][HUB6-1][Inf]--Read command status success
[19:22:53 004][HUB6-1][Inf]--Transfer complete
[19:22:53 004][HUB6-1][Inf]--Send download get_status command succeed
[19:22:53 004][HUB6-1][Inf]--get_status success
[19:22:53 004][HUB6-1][Inf]--verify sha1sum 2b00529d6508352144b169456a6c0f6c092ddc3d
[19:22:53 004][HUB6-1][Inf]--Send verify cmd succeed
[19:22:53 036][HUB6-1][Inf]--Get verify status success
[19:22:53 551][HUB6-1][Inf]-------------Download boot.PARTITION-----------
[19:22:53 551][HUB6-1][Inf]--0-7-0-16
[19:22:53 551][HUB6-1][Inf]--download store boot normal 8437760
[19:22:53 551][HUB6-1][Inf]--Send download command success
[19:22:53 567][HUB6-1][Inf]--Read command status success
[19:22:55 064][HUB6-1][Inf]--Transfer complete
[19:22:55 064][HUB6-1][Inf]--Send download get_status command succeed
[19:22:55 079][HUB6-1][Inf]--get_status success
[19:22:55 079][HUB6-1][Inf]--verify sha1sum 1a7051d961d022ee78a0ac955363b01d0502c6e1
[19:22:55 079][HUB6-1][Inf]--Send verify cmd succeed
[19:22:55 470][HUB6-1][Inf]--Get verify status success
[19:22:55 985][HUB6-1][Inf]-------------Download logo.PARTITION-----------
[19:22:55 985][HUB6-1][Inf]--0-7-0-16
[19:22:55 985][HUB6-1][Inf]--download store logo normal 1218240
[19:22:55 985][HUB6-1][Inf]--Send download command success
[19:22:56 000][HUB6-1][Inf]--Read command status success
[19:22:56 188][HUB6-1][Inf]--Transfer complete
[19:22:56 188][HUB6-1][Inf]--Send download get_status command succeed
[19:22:56 188][HUB6-1][Inf]--get_status success
[19:22:56 188][HUB6-1][Inf]--verify sha1sum 052b910daae452d2555e1f871c416ca5aeec2290
[19:22:56 188][HUB6-1][Inf]--Send verify cmd succeed
[19:22:56 266][HUB6-1][Inf]--Get verify status success
[19:22:56 778][HUB6-1][Inf]-------------Download recovery.PARTITION-----------
[19:22:56 778][HUB6-1][Inf]--0-7-0-16
[19:22:56 778][HUB6-1][Inf]--download store recovery normal 12486656
[19:22:56 778][HUB6-1][Inf]--Send download command success
[19:22:56 793][HUB6-1][Inf]--Read command status success
[19:22:59 892][HUB6-1][Inf]--Transfer complete
[19:22:59 892][HUB6-1][Inf]--Send download get_status command succeed
[19:22:59 892][HUB6-1][Inf]--get_status success
[19:22:59 892][HUB6-1][Inf]--verify sha1sum 23ad2f8dec264c2b86acb62ac151e6490c9fe0b3
[19:22:59 908][HUB6-1][Inf]--Send verify cmd succeed
[19:23:00 470][HUB6-1][Inf]--Get verify status success
[19:23:00 990][HUB6-1][Inf]-------------Download system.PARTITION-----------
[19:23:00 990][HUB6-1][Inf]--0-7-0-16
[19:23:00 990][HUB6-1][Inf]--download store system sparse 1266221252
[19:23:00 990][HUB6-1][Inf]--Send download command success
[19:23:01 006][HUB6-1][Inf]--Read command status success
[19:26:54 766][HUB6-1][Inf]--Transfer complete
[19:26:54 766][HUB6-1][Inf]--Send download get_status command succeed
[19:26:54 770][HUB6-1][Inf]--get_status success
[19:26:54 771][HUB6-1][Inf]--verify sha1sum 621b708aca5860cb856c53410211685764cfea20
[19:26:54 771][HUB6-1][Inf]--Send verify cmd succeed
[19:27:51 597][HUB6-1][Inf]--Get verify status success
[19:27:52 100][HUB6-1][Inf]-------------Download bootloader.PARTITION-----------
[19:27:52 101][HUB6-1][Inf]--0-7-0-16
[19:27:52 102][HUB6-1][Inf]--download store bootloader normal 753664
[19:27:52 102][HUB6-1][Inf]--Send download command success
[19:27:52 117][HUB6-1][Inf]--Read command status success
[19:27:52 732][HUB6-1][Inf]--Transfer complete
[19:27:52 733][HUB6-1][Inf]--Send download get_status command succeed
[19:27:52 737][HUB6-1][Inf]--get_status success
[19:27:52 737][HUB6-1][Inf]--verify sha1sum d789dee4576a5c60896a6e21cd21c2e4b80e3872
[19:27:52 737][HUB6-1][Inf]--Send verify cmd succeed
[19:27:52 830][HUB6-1][Inf]--Get verify status success
[19:27:53 333][HUB6-1][Inf]--save_setting
[19:27:53 333][HUB6-1][Inf]--Send command success
[19:27:53 351][HUB6-1][Inf]--Read command status success
[19:27:53 351][HUB6-1][Inf]--burn_complete 3
[19:27:53 352][HUB6-1][Inf]--Send command success
[19:27:53 365][HUB6-1][Inf]--[0x00000000]Burning successfully
[19:27:53 365][HUB6-1][Inf]--Close device handle 0x00000824
[19:28:16 325][Global][War]--User click stop button
if you have any suggestion i'm here to try, to mention that the pc recognizes the box.
boot via sd card does not respond.
[HELP] Romcode/Initialize DDR/Download buffer/Read item data failed
Posted: Tue Nov 19, 2019 7:30 am
by bumerc
[mention]vladakru[/mention]
Checkbox "erase Bootloader" was not activated, then you could flash the box successfully. But it does not change the fact - this board is encrypted, please contact the manufacturer.
No further support on our part, sorry.