[mention]R4wd0G[/mention]
Change UBT to newer 2.1.7.x version and disable driver signature verification (Win 10).
https://androidpctv.com/firmware-update ... c-amlogic/
[HELP] How to unbrick TX3 Mini (Short pin photo included)
Like you suggested, i disabled the driver signature and repeated the procedure. The behavior appears to be the same.em3ka wrote: ↑Thu Jan 14, 2021 8:18 pm [mention]R4wd0G[/mention]
Change UBT to newer 2.1.7.x version and disable driver signature verification (Win 10).
https://androidpctv.com/firmware-update ... c-amlogic/
In your opinion, would it be due to a incompatible firmware flash?
You do not have the required permissions to view the files attached to this post.
-
- Administrator & Developer
- Posts: 1551
- Joined: Tue Oct 02, 2018 6:19 pm
- Has thanked: 211 times
- Been thanked: 334 times
[mention]R4wd0G[/mention]
1. Download this aml_autoscript and copy it to the mSD card (FAT / FAT32 partition).
2. Press the RESET button, turn on the box and hold the RESET button for 6-8 seconds.
This script completely deletes the old emmc partition layout.
3. Now remove the mSD card from the box and repeat the UBT update
[2021-05-28] modEDIT:
1. Download this aml_autoscript and copy it to the mSD card (FAT / FAT32 partition).
2. Press the RESET button, turn on the box and hold the RESET button for 6-8 seconds.
This script completely deletes the old emmc partition layout.
3. Now remove the mSD card from the box and repeat the UBT update
[2021-05-28] modEDIT:
You do not have the required permissions to view the files attached to this post.
Hello bumerc. First of all, thanks for your tip.bumerc wrote: ↑Thu Jan 14, 2021 10:40 pm [mention]R4wd0G[/mention]
1. Download this aml_autoscript and copy it to the mSD card (FAT / FAT32 partition).
2. Press the RESET button, turn on the box and hold the RESET button for 6-8 seconds.
This script completely deletes the old emmc partition layout.
3. Now remove the mSD card from the box and repeat the UBT update
I was doing this method provided by you since that day you had mentioned this procedure, but the maximum thing that happen suddenly was the LED display that turned on at a random try.(pitcure below) After that, no matter how many times i repeat this procedure, i'm not able to flash the rom.
Trying with SD Card, the maximum i have is a progress bar stucked at 2% (maybe) like this picture:
You do not have the required permissions to view the files attached to this post.
-
- Administrator & Developer
- Posts: 1551
- Joined: Tue Oct 02, 2018 6:19 pm
- Has thanked: 211 times
- Been thanked: 334 times
The stock bootloader and stock kernel were not deleted. The reason for this could be the protection of the eMMC storage with a key (emmc protect key). I will compile a script that should remove the key protection..
-
- Posts: 1
- Joined: Sat Feb 13, 2021 12:52 pm
- Has thanked: 1 time
I have the same hardware and problems, have you made the script yet? Many thx
Sorry friend. I'm facing the same problem until now. I'm waiting for a solution too.. If you discover something, please, let us know.hungbaubqn wrote: ↑Sat Feb 13, 2021 2:54 pmI have the same hardware and problems, have you made the script yet? Many thx