Problem Installing Rom x96 mini

TX3 Mini, X96 Mini, W95 to name a few...
Post Reply
caster008
Posts: 5
Joined: Fri Dec 07, 2018 7:42 am

Problem Installing Rom x96 mini

Post by caster008 » Fri Dec 07, 2018 7:54 am

Hello everyone, sorry if some words do not understand but I'm using the translator, I have the following problem and I wanted advice.
I have 2 x96 mini on one of that I managed to install the 2F version via sd card and I wanted to know how do I update it to the 2FF version ??
On the other I can not install the rom pressing the reset state does not enter the installation mode but delete everything and reinstall the original firmware, I tried to find the app update and beckup but there is not, so I wanted to know how I fix?
Thanks to everyone in advance

User avatar
em3ka
Moderator
Posts: 77
Joined: Sun Jul 15, 2018 11:43 am
Has thanked: 8 times
Been thanked: 16 times

Post by em3ka » Fri Dec 07, 2018 8:06 am

SD card method doesn't work for v2FF because of a newer structure.
⚡ Use Usb Burning Tool method only (you need a USB 2.0 male to male cable).

caster008
Posts: 5
Joined: Fri Dec 07, 2018 7:42 am

Post by caster008 » Fri Dec 07, 2018 10:14 am

ok, thank you, can I use the 3.0 male male cable?
Instead for the other that I can not get into the mode of installation?

User avatar
em3ka
Moderator
Posts: 77
Joined: Sun Jul 15, 2018 11:43 am
Has thanked: 8 times
Been thanked: 16 times

Post by em3ka » Fri Dec 07, 2018 10:57 am

caster008 wrote:
Fri Dec 07, 2018 10:14 am
can I use the 3.0 male male cable?
Yes.
caster008 wrote:
Fri Dec 07, 2018 10:14 am
for the other that I can not get into the mode of installation?
apply "reset pin" - https://forum.atvxperience.com/viewtopic.php?t=213

caster008
Posts: 5
Joined: Fri Dec 07, 2018 7:42 am

Post by caster008 » Fri Dec 07, 2018 3:28 pm

I tried then I hear the sound on the pc but in the program I do not check the door

caster008
Posts: 5
Joined: Fri Dec 07, 2018 7:42 am

Post by caster008 » Sat Dec 08, 2018 1:50 pm

Hello, sorry but through atvx ota update can not upgrade to version 2ff?

Post Reply