[QUESTION] What Android 9 ROMs are compatible with the 1.3 version of the TX3 Mini?
-
- Verified Member
- Posts: 27
- Joined: Thu Oct 10, 2019 11:26 pm
- Has thanked: 5 times
Now thats what I'm talkin about! Maybe hope was next door all along
-
- Verified Member
- Posts: 27
- Joined: Thu Oct 10, 2019 11:26 pm
- Has thanked: 5 times
-
- Verified Member
- Posts: 27
- Joined: Thu Oct 10, 2019 11:26 pm
- Has thanked: 5 times
-
- Administrator & Developer
- Posts: 1551
- Joined: Tue Oct 02, 2018 6:19 pm
- Has thanked: 211 times
- Been thanked: 334 times
Test build
Tested on T95S1 16G (eMMC) / 2G, FD628 7-segment display (deviating vfd configurations must be declared in DTB under the openvfd node)
Should work on devices like TX3Mini v1.3 (eMMC version, with fake P282 designation)
Magicsee N5, etc.
Furthermore, this build could be installed on a test basis on the devices with integrated Nand memory of the new 3D generation (SpekTec / Micron L95B). For this, the NAND support must be activated in DTB. I cannot say whether the kernel MTD driver fully supports this memory type due to the lack of 3D nand devices.
atvX_S905L_P211_SSV_RTL_beta_v4.3.0.tar.xz
Tested on T95S1 16G (eMMC) / 2G, FD628 7-segment display (deviating vfd configurations must be declared in DTB under the openvfd node)
Should work on devices like TX3Mini v1.3 (eMMC version, with fake P282 designation)
Magicsee N5, etc.
Furthermore, this build could be installed on a test basis on the devices with integrated Nand memory of the new 3D generation (SpekTec / Micron L95B). For this, the NAND support must be activated in DTB. I cannot say whether the kernel MTD driver fully supports this memory type due to the lack of 3D nand devices.
atvX_S905L_P211_SSV_RTL_beta_v4.3.0.tar.xz
-
- Posts: 2
- Joined: Wed Feb 03, 2021 12:22 pm
Hi.. did anyone knows rom for tx3 mini ver1.3? Please help
-
- Posts: 2
- Joined: Wed Feb 03, 2021 12:22 pm
bumerc wrote: ↑Tue Feb 02, 2021 10:51 am Test build
Tested on T95S1 16G (eMMC) / 2G, FD628 7-segment display (deviating vfd configurations must be declared in DTB under the openvfd node)
Should work on devices like TX3Mini v1.3 (eMMC version, with fake P282 designation)
Magicsee N5, etc.
Furthermore, this build could be installed on a test basis on the devices with integrated Nand memory of the new 3D generation (SpekTec / Micron L95B). For this, the NAND support must be activated in DTB. I cannot say whether the kernel MTD driver fully supports this memory type due to the lack of 3D nand devices.
atvX_S905L_P211_SSV_RTL_beta_v4.3.0.tar.xz
So, this rom technically should work on tx3 mini ver 1.3? Except clock display and ir remote right?
-
- Administrator & Developer
- Posts: 1551
- Joined: Tue Oct 02, 2018 6:19 pm
- Has thanked: 211 times
- Been thanked: 334 times
Theoretically (I don't have a test device with 3d nand). I will upload another build with activated nand support.93nextgeneration wrote: ↑Thu Feb 04, 2021 3:18 am So, this rom technically should work on tx3 mini ver 1.3? Except clock display and ir remote right?
For tx3 mini with 3D Nand you have to use this dtb..
_aml_dtb.PARTITION
-
- Verified Member
- Posts: 27
- Joined: Thu Oct 10, 2019 11:26 pm
- Has thanked: 5 times
I'll try out the rom since I have a SpekTec NAND chip. I'll come back with the resultsbumerc wrote: ↑Tue Feb 02, 2021 10:51 am Test build
Tested on T95S1 16G (eMMC) / 2G, FD628 7-segment display (deviating vfd configurations must be declared in DTB under the openvfd node)
Should work on devices like TX3Mini v1.3 (eMMC version, with fake P282 designation)
Magicsee N5, etc.
Furthermore, this build could be installed on a test basis on the devices with integrated Nand memory of the new 3D generation (SpekTec / Micron L95B). For this, the NAND support must be activated in DTB. I cannot say whether the kernel MTD driver fully supports this memory type due to the lack of 3D nand devices.
atvX_S905L_P211_SSV_RTL_beta_v4.3.0.tar.xz