[mention]kokito0[/mention] so you're serious about microscope because of D0 pin , it kills my passion to repair my x96mini.
i just prepare the cables, solder, breaking my USB sdcard reader, secure it with tape...
but after review the D0 pin, i take a broom and clean up the dirt I made
anyway would you mind share the password for the dump file ? in case if i found another way to restore the dump. i found this article interesting https://www.slatedroid.com/topic/111538 ... 6mx-by-cxz , i tried some feature like reboot, check connectivity, it all works, i want to try restore the bootloader but i don't have the working bootloader for this x96mini, will there a bootloader in the dump file you share ?
[HELP] X96mini q6x v2.2 17355 bricked
Yes with this dump you can to restore bootloader
@kokito0
Tell me if I can upload your Dump https://mega.nz/file/PsUjGYgK#nBfJ5_EE9 ... rR9i82MZiA using the programmer or ISP method ?
Tell me if I can upload your Dump https://mega.nz/file/PsUjGYgK#nBfJ5_EE9 ... rR9i82MZiA using the programmer or ISP method ?
-
- Posts: 3
- Joined: Sat Jan 22, 2022 7:50 pm
Have you find any solution of it... My device also brick and show same errorkokito0 wrote: ↑Wed Mar 24, 2021 6:36 pm Hello, i have tv box x96mini with board q6x v2.2 17355
It's bricked and when plug power only red light and no screen.
i try to flash with usb burnnig tools many firmware but result it's this error " [0x10103005]Romcode/Initialize DDR/Download buffer/Read item data failed "
when i connect with cable male to male and pc automatic recognize the box ( no need to hold av button)
Can anyone help me ?and which firmware is the right one for this box ?
-
- Posts: 3
- Joined: Sat Jan 22, 2022 7:50 pm
Can anyone help me ? and which firmware is the right one for this box ?kokito0 wrote: ↑Wed Mar 24, 2021 6:36 pm Hello, i have tv box x96mini with board q6x v2.2 17355
It's bricked and when plug power only red light and no screen.
Have you find any solution of it... My device also brick and show same error
i try to flash with usb burnnig tools many firmware but result it's this error " [0x10103005]Romcode/Initialize DDR/Download buffer/Read item data failed "
when i connect with cable male to male and pc automatic recognize the box ( no need to hold av button)
-
- Posts: 3
- Joined: Sat Jan 22, 2022 7:50 pm
When i convert imgc to img file it becomes too large file about 15 gb... And not able to flash... Plz help mekodov wrote: ↑Sat Jan 01, 2022 4:20 pm @kokito0
Tell me if I can upload your Dump https://mega.nz/file/PsUjGYgK#nBfJ5_EE9 ... rR9i82MZiA using the programmer or ISP method ?
-
- Posts: 2
- Joined: Wed Apr 27, 2022 3:29 pm
Hello @kokito0 , are you sure if i do what u have successful done to your q6x 13775 board.. it come to same result? I want to try it..
Thanks before
Last edited by alvinseliang on Sat May 07, 2022 10:28 am, edited 1 time in total.
-
- Posts: 2
- Joined: Wed Apr 27, 2022 3:29 pm
-
- Posts: 3
- Joined: Thu Oct 13, 2022 4:52 am
- Been thanked: 1 time
The link is dead - is someone have the dump?kokito0 wrote: ↑Sun Apr 18, 2021 8:10 amno this is twrp dumpqontol wrote: ↑Sun Apr 18, 2021 5:43 am Hi @kokito0 , i need this to if you don't mindalso do you using the dump firmware from this post ?didux wrote: ↑Thu Mar 25, 2021 3:21 am @kokito0 https://drive.google.com/u/0/uc?id=1nqQ ... t=download
this is original dump ==> https://mega.nz/file/PsUjGYgK#nBfJ5_EE9 ... rR9i82MZiA