x96mini Problem USB Burning Tool

[Erazu1]

All the roms for s905x will be compatibile with my box?
Witch are the differences between s905w p281 and s905x p212

If you have any luck porting, please let me know how. I would like to try but i dont know how to port files from a .img

[lzeta]

All the roms for s905x will be compatibile with my box?
Witch are the differences between s905w p281 and s905x p212

If you have any luck porting, please let me know how. I would like to try but i dont know how to port files from a .img

ok I'll update you about it
In this thread is explaned all you need to make it

[Montesuma80]

I have the same X96 mini and tried to flash over SD-Card. Now it doesn't boot. Is there a new Firmware? Or a new work around to re flash a working firmware?

[bumerc]

I have the same X96 mini and tried to flash over SD-Card. Now it doesn't boot. Is there a new Firmware? Or a new work around to re flash a working firmware?

There is no new FW for this box, but you can port t95s1 FW to atvX. Use usb_burn method.

[shujabutt]

Hello I am using v2ff from about 3 mouths It is working fine I am very happy about your Software i appreciate You Guys.
I just need a little help about x96mini i have 2 of them and i want to install v3 but my both boxes are not booting to recovery using AV port method

[bumerc]

[mention]shujabutt[/mention]
To install v3, you must complete a new installation via usb_burn or sdc_burn, not an OTA update. Besides, the v3 is not released yet

[Erazu1]

I replaced the files on the ATVXperience for p212, but im getting an error in the burning tool saying

[08:50:07 976][HUB1-5][Err]--[0x30402004]UBOOT/Partition odm/Initialize partition/Error result

Any advice?

[bumerc]

I replaced the files on the ATVXperience for p212, but im getting an error in the burning tool saying

[08:50:07 976][HUB1-5][Err]--[0x30402004]UBOOT/Partition odm/Initialize partition/Error result

Any advice?

ODM is an Oreo partition, apparently you have confused something Make it new

[Erazu1]

I replaced the files on the ATVXperience for p212, but im getting an error in the burning tool saying

[08:50:07 976][HUB1-5][Err]--[0x30402004]UBOOT/Partition odm/Initialize partition/Error result

Any advice?

ODM is an Oreo partition, apparently you have confused something Make it new

I was thinking about it. It seems that the version for s905x on the site is Oreo now, let me see where i can find the nougat version. I'm trying with a file called atvXperience_v2C and I'm having luck on getting to the boot screen. Can i work on it? which files i should replace? i tried the ones you mentioned

Right..
t95s1 bootloader.PARTITION to atvX..*.img
t95s1 aml_sdc_burn.UBOOT to atvX..*.img
t95s1 UBOOT.USB to atvX..*.img
t95s1 DDR.USB to atvX..*.img

and
t95s1 _aml_dtb.PARTITION to atvX..*.img

otherwise the atvX kernel will not start

But just boot screen. I'm still pretty new in porting, is my first time

[lzeta]

All the roms for s905x will be compatibile with my box?

maybe, give it a try. Bootloader files, dtb and kernel, must be taken from the t95s1.

I've tried to do it with your ativxeperience s905x 2Gb but it don't works. I've flashed again the t95s1. I hope you do a version for this box soon as possible. Thank you.