ATV Xperience ROM on WeChip A95X F1 (S905W/2GB/16GB)
- em3ka
- Moderator
- Posts: 1835
- Joined: Sun Jul 15, 2018 11:43 am
- Has thanked: 108 times
- Been thanked: 370 times
v2H - Optional Build (Use only if v2FF has problems), yes and is also based on 7.1.2simoneatvxp wrote: ↑Sun Sep 08, 2019 3:50 pm ...i've seen on the download site, a new versione the v2h version.
this is a new version to update?
-
- Verified Member
- Posts: 12
- Joined: Sun Sep 08, 2019 10:45 am
- Has thanked: 2 times
- Been thanked: 1 time
Ok thanks so tomorrow i will update item3ka wrote: ↑Sun Sep 08, 2019 5:12 pmv2H - Optional Build (Use only if v2FF has problems), yes and is also based on 7.1.2simoneatvxp wrote: ↑Sun Sep 08, 2019 3:50 pm ...i've seen on the download site, a new versione the v2h version.
this is a new version to update?
Thanks a lot
-
- Verified Member
- Posts: 12
- Joined: Sun Sep 08, 2019 10:45 am
- Has thanked: 2 times
- Been thanked: 1 time
but why ota update doesn't work?em3ka wrote: ↑Sun Sep 08, 2019 5:12 pmv2H - Optional Build (Use only if v2FF has problems), yes and is also based on 7.1.2simoneatvxp wrote: ↑Sun Sep 08, 2019 3:50 pm ...i've seen on the download site, a new versione the v2h version.
this is a new version to update?
-
- Verified Member
- Posts: 12
- Joined: Sun Sep 08, 2019 10:45 am
- Has thanked: 2 times
- Been thanked: 1 time
-
- Posts: 8
- Joined: Tue Sep 11, 2018 10:25 pm
i'm trying flash v2ff on this box, but receive every time the same error :
[00:09:53 822][HUB5-1][Inf]--Get verify status success
[00:09:54 322][HUB5-1][Inf]--support_tempcontrol
[00:09:54 322][HUB5-1][Inf]--Send command success
[00:09:54 329][HUB5-1][Inf]--Read command status success
[00:09:54 329][HUB5-1][Inf]--tempcontrol 0 100
[00:09:54 329][HUB5-1][Inf]--Send command success
[00:09:54 336][HUB5-1][Err]--failed:Invalid:minTemp=0, maxTemp=100
[00:09:54 336][HUB5-1][Err]--Check command return failed
[00:09:54 336][HUB5-1][Inf]--Failure : 1, FailureMax : 3
[00:09:54 336][HUB5-1][Inf]--tempcontrol 0 100
[00:09:54 337][HUB5-1][Inf]--Send command success
[00:09:54 342][HUB5-1][Err]--failed:Invalid:minTemp=0, maxTemp=100
[00:09:54 343][HUB5-1][Err]--Check command return failed
[00:09:54 343][HUB5-1][Inf]--Failure : 2, FailureMax : 3
[00:09:54 343][HUB5-1][Inf]--tempcontrol 0 100
[00:09:54 343][HUB5-1][Inf]--Send command success
[00:09:54 349][HUB5-1][Err]--failed:Invalid:minTemp=0, maxTemp=100
[00:09:54 350][HUB5-1][Err]--Check command return failed
[00:09:54 350][HUB5-1][Inf]--Failure : 3, FailureMax : 3
[00:09:54 357][HUB5-1][Err]--[0x30702004]Uboot/Temprature Testting/Get result/Out of range
[00:09:54 358][HUB5-1][Inf]--Close device handle 0x00000534
I've tryed many temperature setting, maybe a cable or hardware problem. I've already successfully flashed a unit whit only 1gb many days ago, after a first same error , but now I've tryed 20 time.
[0x30702004]Uboot/Temprature Testting/Get result/Out of range
[00:09:53 822][HUB5-1][Inf]--Get verify status success
[00:09:54 322][HUB5-1][Inf]--support_tempcontrol
[00:09:54 322][HUB5-1][Inf]--Send command success
[00:09:54 329][HUB5-1][Inf]--Read command status success
[00:09:54 329][HUB5-1][Inf]--tempcontrol 0 100
[00:09:54 329][HUB5-1][Inf]--Send command success
[00:09:54 336][HUB5-1][Err]--failed:Invalid:minTemp=0, maxTemp=100
[00:09:54 336][HUB5-1][Err]--Check command return failed
[00:09:54 336][HUB5-1][Inf]--Failure : 1, FailureMax : 3
[00:09:54 336][HUB5-1][Inf]--tempcontrol 0 100
[00:09:54 337][HUB5-1][Inf]--Send command success
[00:09:54 342][HUB5-1][Err]--failed:Invalid:minTemp=0, maxTemp=100
[00:09:54 343][HUB5-1][Err]--Check command return failed
[00:09:54 343][HUB5-1][Inf]--Failure : 2, FailureMax : 3
[00:09:54 343][HUB5-1][Inf]--tempcontrol 0 100
[00:09:54 343][HUB5-1][Inf]--Send command success
[00:09:54 349][HUB5-1][Err]--failed:Invalid:minTemp=0, maxTemp=100
[00:09:54 350][HUB5-1][Err]--Check command return failed
[00:09:54 350][HUB5-1][Inf]--Failure : 3, FailureMax : 3
[00:09:54 357][HUB5-1][Err]--[0x30702004]Uboot/Temprature Testting/Get result/Out of range
[00:09:54 358][HUB5-1][Inf]--Close device handle 0x00000534
I've tryed many temperature setting, maybe a cable or hardware problem. I've already successfully flashed a unit whit only 1gb many days ago, after a first same error , but now I've tryed 20 time.
[0x30702004]Uboot/Temprature Testting/Get result/Out of range
-
- Verified Member
- Posts: 12
- Joined: Sun Sep 08, 2019 10:45 am
- Has thanked: 2 times
- Been thanked: 1 time
hi to all.
i've noticed on my tv box, which the display doesn't work after update.
it's a bug or i need to reflash the rom?
i've noticed on my tv box, which the display doesn't work after update.
it's a bug or i need to reflash the rom?