Maybe someone can help me to run the atvXperience at my box ( M9C max 4k although inside its labeled as TX3 PRO)
I flashed the box using the aml-linux-usb-burn (http://github.com/Stane1983/aml-linux-usb-burn) and goes well, but when I start the box gets stuck with splash screen ( very nice btw ).
I opened the box and found rs323 ports to conntect and here a chunk of the boot
Code: Select all
603 [ 2.757174@0] Call trace:
604 [ 2.759803@0] [<ffffffc0017eedc8>] pwm_double_channel_conf+0x8c/0x1a4
605 [ 2.766277@0] [<ffffffc0017ef12c>] wifi_dev_probe+0x24c/0x87c
606 [ 2.772054@0] [<ffffffc00148ec80>] platform_drv_probe+0x28/0x60
607 [ 2.778005@0] [<ffffffc00148cbec>] really_probe+0xd4/0x244
608 [ 2.783515@0] [<ffffffc00148ce80>] __driver_attach+0xb0/0xb8
609 [ 2.789203@0] [<ffffffc00148ac54>] bus_for_each_dev+0x68/0xac
610 [ 2.794978@0] [<ffffffc00148c69c>] driver_attach+0x28/0x34
611 [ 2.800491@0] [<ffffffc00148c2a4>] bus_add_driver+0x158/0x210
612 [ 2.806264@0] [<ffffffc00148d63c>] driver_register+0x64/0x124
613 [ 2.812039@0] [<ffffffc00148ec48>] __platform_driver_register+0x74/0x84
614 [ 2.818691@0] [<ffffffc001f88e14>] wifi_dt_init+0x18/0x24
615 [ 2.824116@0] [<ffffffc0010816a4>] do_one_initcall+0xd4/0x138
616 [ 2.829893@0] [<ffffffc001f48914>] kernel_init_freeable+0x13c/0x1dc
617 [ 2.836193@0] [<ffffffc001b1c6a0>] kernel_init+0x1c/0xdc
618 [ 2.841528@0] Code: 97f15c53 b140041f aa0003f3 540007c8 (f9400f60)
619 [ 2.847905@0] ---[ end trace 9974a23e1aac2d9f ]---
620 [ 2.858390@0] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
621 [ 2.858390@0]
I hope this could be fixed to enjoy with your rom.
thanks
bootlog http://gitlab.com/snippets/1922286