[HELP] SD card won't install
-
- Posts: 2
- Joined: Fri May 31, 2019 8:56 pm
Thanks in advance for any help. Tried the USB burning tool and the male to male cable on 2 different computers(win 8 and win 10) for my x96 box. Nothing worked so used the SD burning tool to burn the image onto a blank SD card. When I insert into box and reset and power on, it just opens up the reset menu, with this error "E:/ cant find /misc". Any idea what I am doing wrong?
-
- Administrator & Developer
- Posts: 1551
- Joined: Tue Oct 02, 2018 6:19 pm
- Has thanked: 211 times
- Been thanked: 334 times
You need to enable the "erase flash" optionbsell1 wrote: ↑Fri May 31, 2019 9:15 pm Thanks in advance for any help. Tried the USB burning tool and the male to male cable on 2 different computers(win 8 and win 10) for my x96 box. Nothing worked so used the SD burning tool to burn the image onto a blank SD card. When I insert into box and reset and power on, it just opens up the reset menu, with this error "E:/ cant find /misc". Any idea what I am doing wrong?
-
- Administrator & Developer
- Posts: 1551
- Joined: Tue Oct 02, 2018 6:19 pm
- Has thanked: 211 times
- Been thanked: 334 times
The FAT partition is only relevant for uboot and has no direct impact on Android partitions like "misc". If you use an unformatted SD card for an update, the bootloader can not read any data from it. This means that your bootloader was unable to read the aml_sdc_burn.ini and, accordingly, has not received a command to erase eMMC memory. Therefore you got an error after the reboot with undiscovered "misc" partition. If you had used ABT, you would only have to tick the "erase flash" and that would solve the problem.