Page 1 of 1
[HELP] I'm so confused, which rom to flash on my device?
Posted: Sun Sep 08, 2019 2:29 pm
by pfornaro
Hello guys, sorry if I'm making this noob topic but I'm very confused and I'd like to not brick my device.
I have an old Nexbox A95X (bought in late 2016) running an old custom rom. I just need this device to work with Moonlight game streaming possibly with a working IR remote to power on and off the device lol. So firstly I'd like to ask if it's worth to flash the atvXperience on it and (most important thing) if it has the support to DS4 controller connected via bluetooth.
If so, which version do I need to flash (since there are 3 possibilities) and which method should I use? (Burnintoool or sdcard)
Thanks in advance for you attention and your help
https://ibb.co/4gW67JT
[HELP] I'm so confused, which rom to flash on my device?
Posted: Mon Sep 09, 2019 8:49 am
by pfornaro
Up, anyone? Which of these should be the right image for my device?
https://ibb.co/ygYtHrJ
[HELP] I'm so confused, which rom to flash on my device?
Posted: Mon Sep 09, 2019 9:43 am
by em3ka
[mention]pfornaro[/mention]
firmware for TX5 Pro (S905X, p212, 2GB) atvX DOWNLOAD
- v2FF (S905X_atvXperience_2FF 1G+
2G.rar)
- optional v2H (atvXperience_S905X_V2H_FINAL.img)
- test OREO version
v3wip
[HELP] I'm so confused, which rom to flash on my device?
Posted: Mon Sep 09, 2019 10:34 am
by pfornaro
em3ka wrote: ↑Mon Sep 09, 2019 9:43 am
[mention]pfornaro[/mention]
firmware for TX5 Pro (S905X, p212, 2GB) atvX DOWNLOAD
- v2FF (S905X_atvXperience_2FF 1G+
2G.rar)
- optional v2H (atvXperience_S905X_V2H_FINAL.img)
- test OREO version
v3wip
Thanks for your reply dude. Anyway my device is not a TX5 PRO, it is an old Nexbox A95X. I think the custom firmware was based on that model but with some modifications. Do you think it should be right anyway?
[HELP] I'm so confused, which rom to flash on my device?
Posted: Mon Sep 09, 2019 2:02 pm
by em3ka
pfornaro wrote: ↑Mon Sep 09, 2019 10:34 am
...I think the custom firmware was based on that model but with some
modifications. Do you think it
should be right anyway?
Maybe, with that custom firmware as a backup, you could try it.
[HELP] I'm so confused, which rom to flash on my device?
Posted: Mon Sep 09, 2019 3:19 pm
by pfornaro
em3ka wrote: ↑Mon Sep 09, 2019 2:02 pm
pfornaro wrote: ↑Mon Sep 09, 2019 10:34 am
...I think the custom firmware was based on that model but with some
modifications. Do you think it
should be right anyway?
Maybe, with that custom firmware as a backup, you could try it.
I can't make any backup sadly, I don't have TWRP. Can I install this version S905X_atvXperience_2FF 1G+2G.rar through SD card method? I actually don't have the USB male to male cable, I lost it.
[HELP] I'm so confused, which rom to flash on my device?
Posted: Mon Sep 09, 2019 3:59 pm
by ricklar
Try V2F for SDcard maker installation, not V2FF which is only formatted for USB Burn Tool install; but is probably best that you go buy or order a cable because if the SDcard install fails and corrupts the Nand memory chip, you will only be able to recover device with USB Burning Tool, so like always try at your own risk or be smart and have the cable for backup instillation if SDcard install fails.
[HELP] I'm so confused, which rom to flash on my device?
Posted: Tue Sep 10, 2019 1:45 pm
by pfornaro
ricklar wrote: ↑Mon Sep 09, 2019 3:59 pm
Try
V2F for SDcard maker installation, not V2FF which is only formatted for USB Burn Tool install; but is probably best that you go buy or order a cable because if the SDcard install fails and corrupts the Nand memory chip, you will only be able to recover device with USB Burning Tool, so like always try at your own risk or be smart and have the cable for backup instillation if SDcard install fails.
Ok I'll take another USB male male cable then. Thanks for your help guys. I'll let you know. Last question: does this rom fix the auto brightness issue? On my box when I'm watching something on Kodi, the brightness automatically goes down when the scene is a bit more darker.