Magicsee N5

MiBox, X96 to name a few...
Post Reply
forkman
Posts: 6
Joined: Fri Oct 05, 2018 9:37 pm

Magicsee N5

Post by forkman » Mon Oct 08, 2018 8:17 am

Mine works fine except IR remote. After first boot I have the same problem with video output - TV says that box is using unsupported resolution. Solution was reboot with HDMI cable connected. It's tested on Samsung TV and cheap portable TV. Both displays fine in full HD.

I've flashed back original firmware, copied remote.conf (after root), then flased ATVx and repaced ATVx's remote.conf by N5 original one but with no luck. Remote is still not working. Could anybody help? @Nayam

pluto
Posts: 5
Joined: Fri Oct 05, 2018 11:01 am
Has thanked: 2 times

Post by pluto » Tue Oct 09, 2018 10:18 am

Hi, thanks that must be it I only have 1 TV I have now flashed back the stock image and works , Also reading seems the resolution isnt remembered each time you restart the box ? so i think i will wait and hope update is released with more fixes

also to point out the original remote that came with my box never worked even with stock rom so either remote is faulty or box sensor part fault but i just use different remote

THanks

forkman wrote:
Mon Oct 08, 2018 8:17 am
Mine works fine except IR remote. After first boot I have the same problem with video output - TV says that box is using unsupported resolution. Solution was reboot with HDMI cable connected. It's tested on Samsung TV and cheap portable TV. Both displays fine in full HD.

I've flashed back original firmware, copied remote.conf (after root), then flased ATVx and repaced ATVx's remote.conf by N5 original one but with no luck. Remote is still not working. Could anybody help? @Nayam

forkman
Posts: 6
Joined: Fri Oct 05, 2018 9:37 pm

Post by forkman » Wed Oct 10, 2018 12:29 pm

It seems the resolution is not remembered, my N5 switch off HDMI output every boot or a while (or TV detect unsupported resolution).

My remote is working with stock firmware. Even remote for TX3 mini works well with N5 stock firmware (except volume buttons).

ATVx runs smooth on N5 but because of non-functioning remote control it's not usable for me.

pincopinco
Posts: 2
Joined: Fri Oct 19, 2018 9:55 am

Post by pincopinco » Fri Oct 19, 2018 4:04 pm

in the last firmware the ir remote working?

destinqo
Verified Member
Posts: 11
Joined: Tue Nov 06, 2018 10:11 am
Has thanked: 2 times

Post by destinqo » Tue Nov 06, 2018 10:12 am

Hello,

any chance new 2FF for N5 will be releases ?

2F upgrade to s905x 2FF not works.

thanks for update.

werewolf
Posts: 8
Joined: Sun Nov 04, 2018 12:08 am

Post by werewolf » Fri Nov 23, 2018 11:14 pm

If you can do a new firmware from 2FF to n5 and put the remote working it will be great m8.

destinqo
Verified Member
Posts: 11
Joined: Tue Nov 06, 2018 10:11 am
Has thanked: 2 times

Post by destinqo » Sun Nov 25, 2018 8:41 pm

werewolf wrote:
Fri Nov 23, 2018 11:14 pm
If you can do a new firmware from 2FF to n5 and put the remote working it will be great m8.
i repack 2ff with original kernel from magicsee (it works good hdmi, remote controller, except google play services). Admin not response. atvxperience is DEAD! i sell my N5 box and order S905X2 box - https://www.aliexpress.com/item/ACEMAX- ... 45959.html

android TV from manufacturer.

zcrself
Posts: 1
Joined: Mon Nov 26, 2018 6:43 am

Post by zcrself » Mon Nov 26, 2018 6:51 am

destinqo wrote:
Sun Nov 25, 2018 8:41 pm
werewolf wrote:
Fri Nov 23, 2018 11:14 pm
If you can do a new firmware from 2FF to n5 and put the remote working it will be great m8.
i repack 2ff with original kernel from magicsee (it works good hdmi, remote controller, except google play services). Admin not response. atvxperience is DEAD! i sell my N5 box and order S905X2 box - https://www.aliexpress.com/item/ACEMAX- ... 45959.html

android TV from manufacturer.
Could you upload your repack version to mega.nz

destinqo
Verified Member
Posts: 11
Joined: Tue Nov 06, 2018 10:11 am
Has thanked: 2 times

Post by destinqo » Wed Nov 28, 2018 3:08 pm

zcrself wrote:
Mon Nov 26, 2018 6:51 am
destinqo wrote:
Sun Nov 25, 2018 8:41 pm
[quote=werewolf post_id=2172 time=1543014854 user_id=930
If you can do a new firmware from 2FF to n5 and put the remote working it will be great m8.
i repack 2ff with original kernel from magicsee (it works good hdmi, remote controller, except google play services). Admin not response. atvxperience is DEAD! i sell my N5 box and order S905X2 box - https://www.aliexpress.com/item/ACEMAX- ... 45959.html

android TV from manufacturer.
Could you upload your repack version to mega.nz
[/quote]

https://apk.default.sk/N5_atvXperience_ ... _kernel.7z

werewolf
Posts: 8
Joined: Sun Nov 04, 2018 12:08 am

Post by werewolf » Thu Nov 29, 2018 9:43 pm

Can you explain or share a link of what to grab from original rom and were to put in atvexperience?

Post Reply