hello my tv box is damaged and does not turn on, every time I want to install the atvexperience firmware it tells me the following error
[0x32030201] Uboot / Get Result / Diskinitial error
I don't know how much of Ram I had, I forgot to notice, inside the tvbox it says S905XQ4_V1.0 2017.11.23
I tried the different firmwares on the download page but none of them works, which one I would have to install.
MXQ PRO 4K S905x(w) Uboot/Get result/DiskInitial error
- ricklar
- Moderator
- Posts: 889
- Joined: Fri Nov 30, 2018 10:30 pm
- Has thanked: 139 times
- Been thanked: 249 times
MXQ devices are not supported by ATV-X firmware.
You tried and were not lucky, so go back to original Firmware, or look to XDA-developers to find a possible ROM match to the MXQ device.
You tried and were not lucky, so go back to original Firmware, or look to XDA-developers to find a possible ROM match to the MXQ device.
BE KIND, BE NICE, BE RESPECTFUL TO OTHERS, RESPECT THE MODERATORS,
*IMPORTANT NOTE* ONLY PM MODERATORS OR DEVELOPERS AS A LAST RESORT!!!
My test device: H96 Pro+ 3gb/32gb DDR4 Plus own Tanix, Beelink, Alfawise, X96S, Odroid-N2, Khadas VIM3L, X3, ADT-3, X96-Air
GEARBEST.com
PLEASE ENJOY ATVX!
*IMPORTANT NOTE* ONLY PM MODERATORS OR DEVELOPERS AS A LAST RESORT!!!
My test device: H96 Pro+ 3gb/32gb DDR4 Plus own Tanix, Beelink, Alfawise, X96S, Odroid-N2, Khadas VIM3L, X3, ADT-3, X96-Air
GEARBEST.com
PLEASE ENJOY ATVX!
-
- Posts: 1
- Joined: Sat Jan 18, 2020 12:29 pm
[HELP] mxq pro 4k
I tried flashing two boxes both seem to be bricked
I had a problem when flashing, I got the following error [0x32030201]Uboot/Get result/DiskInitial error
I looked on the forums and found a suggestion to untick erase bootloader option, so i did so.
The flash was successful but when I connect to tv nothing happens.
can someone pleases help, is there anything I can do
modEDIT: Read post above, same applies in your case for you to.
I tried flashing two boxes both seem to be bricked
I had a problem when flashing, I got the following error [0x32030201]Uboot/Get result/DiskInitial error
I looked on the forums and found a suggestion to untick erase bootloader option, so i did so.
The flash was successful but when I connect to tv nothing happens.
can someone pleases help, is there anything I can do
modEDIT: Read post above, same applies in your case for you to.
-
- Posts: 1
- Joined: Sun Jul 26, 2020 5:39 pm
I can't flash my box I get to 4% with some roms and 7% with other. On the motherboard it says amlogic s905x quad core. It has android 7.1 with stock firmware and it works like crap. I tried with usb burning tool 2.2.0 and 2.1.7 , I tried all the combinations of starting the program first, after, plugging extra energy, etc. But it stops with 7% formating , get result/diskinitial error in some cases , and 4% read checkpara /error result in others.. I already spent about 4 hs between reaserching posible solutions and trying different ways of doing it. Haven't tried with sd (I would have to buy one )