Dear guys I ordered S905x but received S905L. According to several sources the s905L soc comes without VP9 but with HDCPv2. Is it possible to flash S905x fw?
Kind regards
[HELP] x5 S905L RT8189ETV wifi - possible to flash x/w firmware?
- ricklar
- Moderator
- Posts: 889
- Joined: Fri Nov 30, 2018 10:30 pm
- Has thanked: 139 times
- Been thanked: 249 times
Different chip is different DTB, Bootloader, and Kernel. So, my answer would be NO the S905x firmware will not work without modification. If you change those parts of the firmware then maybe it will load.
BE KIND, BE NICE, BE RESPECTFUL TO OTHERS, RESPECT THE MODERATORS,
*IMPORTANT NOTE* ONLY PM MODERATORS OR DEVELOPERS AS A LAST RESORT!!!
My test device: H96 Pro+ 3gb/32gb DDR4 Plus own Tanix, Beelink, Alfawise, X96S, Odroid-N2, Khadas VIM3L, X3, ADT-3, X96-Air
GEARBEST.com
PLEASE ENJOY ATVX!
*IMPORTANT NOTE* ONLY PM MODERATORS OR DEVELOPERS AS A LAST RESORT!!!
My test device: H96 Pro+ 3gb/32gb DDR4 Plus own Tanix, Beelink, Alfawise, X96S, Odroid-N2, Khadas VIM3L, X3, ADT-3, X96-Air
GEARBEST.com
PLEASE ENJOY ATVX!
-
- Expert Member
- Posts: 405
- Joined: Sat Sep 29, 2018 6:29 pm
- Has thanked: 28 times
- Been thanked: 23 times
2nd: I do not own manufacturer fw img. But I read it was possible to backup bootloader, dtb and stuff through terminal while Android is running. Anyone tried this?
You do not have the required permissions to view the files attached to this post.
-
- Administrator & Developer
- Posts: 1551
- Joined: Tue Oct 02, 2018 6:19 pm
- Has thanked: 211 times
- Been thanked: 334 times
[mention]soldiaz[/mention]
that does not look so bad, uart pins are already available. You now need to connect a uart adapter to see how the boot sequence changes if any pin short on GND
that does not look so bad, uart pins are already available. You now need to connect a uart adapter to see how the boot sequence changes if any pin short on GND