[HELP] Need a working firmware x96 v88-v1.0 2017-05-23
- achour
- Verified Member
- Posts: 30
- Joined: Mon Apr 13, 2020 10:21 pm
- Has thanked: 5 times
- Been thanked: 3 times
Guys who may have encountered such a problem. I want to install ATV firmware with Amlogic USB Burning Tool but when flashing at 7 seconds, it writes an error [0x10105002] Romcode / Initialize DDR / Read initialize status / USB Control setup error. In this case, if I am flashing with the factory firmware, everything is flashed without problems. I tried to remove the ticks in the program, but still does not allow me to flash.
You do not have the required permissions to view the files attached to this post.
- achour
- Verified Member
- Posts: 30
- Joined: Mon Apr 13, 2020 10:21 pm
- Has thanked: 5 times
- Been thanked: 3 times
i already tried to install this custom rom (Aidan's rom) but still encountered the same error message on the Burning tool : [0x10105002] Romcode / Initialize DDR / Read initialize status / USB Control setup error
this box will eventually drive me crazy
this box will eventually drive me crazy
-
- Administrator & Developer
- Posts: 1551
- Joined: Tue Oct 02, 2018 6:19 pm
- Has thanked: 211 times
- Been thanked: 334 times
[mention]achour[/mention]
Is it a 1g or 2g device? On this basis I could create a bootloader update for p212 LPDDR3 devices.
I am 100% sure that after switching from android 6 to 7 you created a boot loop and now have to short-circuit the emmc pins 29-30
Is it a 1g or 2g device? On this basis I could create a bootloader update for p212 LPDDR3 devices.
I am 100% sure that after switching from android 6 to 7 you created a boot loop and now have to short-circuit the emmc pins 29-30
- achour
- Verified Member
- Posts: 30
- Joined: Mon Apr 13, 2020 10:21 pm
- Has thanked: 5 times
- Been thanked: 3 times
effectively every time there is a problem i use the method on the video below to get out of it
https://youtu.be/fsyS3p5asZs
I am desperately looking for an original or modified firmware .img with Android 7 (nougat) or 8 (oreo) or 9 (pie) compatible with my Android box X96 2g / 16 (soc S905x) motherboard V88-v1.0 23/05/2017
https://youtu.be/fsyS3p5asZs
I am desperately looking for an original or modified firmware .img with Android 7 (nougat) or 8 (oreo) or 9 (pie) compatible with my Android box X96 2g / 16 (soc S905x) motherboard V88-v1.0 23/05/2017
- aidanmacgregor
- Administrator & Developer
- Posts: 9
- Joined: Thu Jan 02, 2020 4:35 am
- Has thanked: 7 times
- Been thanked: 1 time
hopefully get your device back up ad running with newer android version