[HELP] Need a working firmware x96 v88-v1.0 2017-05-23

[achour]

Guys who may have encountered such a problem. I want to install ATV firmware with Amlogic USB Burning Tool but when flashing at 7 seconds, it writes an error [0x10105002] Romcode / Initialize DDR / Read initialize status / USB Control setup error. In this case, if I am flashing with the factory firmware, everything is flashed without problems. I tried to remove the ticks in the program, but still does not allow me to flash.

[em3ka]

Link to firmware [Gdrive], from 4PDA thread...

[achour]

thank you for your answer " em3ka " but i am looking for installed a personalized rom like ATV and not the original firmware android 6.


Other suggestions ... ??

[em3ka]

I dont think that you can flash any other firmware on that box, except from the manufacturer of this device, but you can try with this firmware.

[achour]

i already tried to install this custom rom (Aidan's rom) but still encountered the same error message on the Burning tool : [0x10105002] Romcode / Initialize DDR / Read initialize status / USB Control setup error

this box will eventually drive me crazy

[bumerc]

[mention]achour[/mention]
Is it a 1g or 2g device? On this basis I could create a bootloader update for p212 LPDDR3 devices.
I am 100% sure that after switching from android 6 to 7 you created a boot loop and now have to short-circuit the emmc pins 29-30

[achour]

effectively every time there is a problem i use the method on the video below to get out of it

https://youtu.be/fsyS3p5asZs

I am desperately looking for an original or modified firmware .img with Android 7 (nougat) or 8 (oreo) or 9 (pie) compatible with my Android box X96 2g / 16 (soc S905x) motherboard V88-v1.0 23/05/2017

[bumerc]

2g ok.. i will prepare a test build for this device next week, you may need to test it several times

[achour]

thank you so much

I will be looking forward to it !!!

[aidanmacgregor]

hopefully get your device back up ad running with newer android version