[ROM] atvX v4 - AndroidTV 9.0 (S905X)

[bumerc]

Hello. Please tell me if it works stably on AP6354?

Download the Ampak version for your WiFi chip and test it, only the multi-wifi version has been tested by us and not special builds for individual WiFi chips, as we do not have any test equipment for it.

[krustyx]

I have to short as the same time as I plug the USB...

- import (firmware) .img file in USB Burning Tool
- press Start button and leave program running
- plug in usb male to male cable, one end to the tv box and other end to the computer
- short the pins on PCB and you should here sound
- a message connection success should appear in the UBT and flashing process will start...

shortpin.jpg

Thanks a lot for your help. I've been trying but no luck. I do see the light on the box reseting when both pins are touched, but computer doesnt detect anything unfortunately

[bumerc]

Thanks a lot for your help. I've been trying but no luck. I do see the light on the box reseting when both pins are touched, but computer does

Please post HQ photos of CPU, RAM and emmc

[krustyx]

Thanks a lot for your help. I've been trying but no luck. I do see the light on the box reseting when both pins are touched, but computer does

Please post HQ photos of CPU, RAM and emmc

Actually, when I touch the pins mentionned above, nothing happens. When i touch pins 25-26, the box resets, and also 37-38

[krustyx]

emmc : https://photos.app.goo.gl/6ivxktMJcJCHL5xV8

as for the CPU, i think there's the heatsink on top of it (middle of the board), you want me to remove it?

And for the RAM, not sure this is it : https://photos.app.goo.gl/FtyFKqZpRVkwJpDJ8

[bumerc]

as for the CPU, i think there's the heatsink on top of it (middle of the board), you want me to remove it?

yes please, it looks like a Rockchip PCB

[krustyx]

AMLogic S905

[bumerc]

AMLogic S905

S905 (p201 board) is not supported, too old.

[krustyx]

Allright, garbage them, thanks for all your support

[bumerc]

Instead from computer, use the same procudure with short pins and try to flash stock firmware .img from SD card.

S905 (p201 board) is not supported, too old.