[QUESTION] Dual-boot atvX v4 and CoreELEC possible?
-
- Verified Member
- Posts: 10
- Joined: Thu Nov 08, 2018 8:22 pm
- Has thanked: 1 time
- Been thanked: 2 times
I mentioned in the first post that when I installed v2H on this device only the image for S905W could be flashed. The S905X v4 images can be flashed on H96 Pro H3, but apparently they do not work quite well on it. I just flashed "atvX_s905w_4.2.1" and it worked fine. AIDA 64 shows 2GB RAM and CoreELEC booted.
-
- Administrator & Developer
- Posts: 1551
- Joined: Tue Oct 02, 2018 6:19 pm
- Has thanked: 211 times
- Been thanked: 334 times
I will do a RAM timing update for this device and build an extra IMG for it..piperka07 wrote: ↑Tue Dec 01, 2020 8:39 pm I mentioned in the first post that when I installed v2H on this device only the image for S905W could be flashed. The S905X v4 images can be flashed on H96 Pro H3, but apparently they do not work quite well on it. I just flashed "atvX_s905w_4.2.1" and it worked fine. AIDA 64 shows 2GB RAM and CoreELEC booted.
-
- Verified Member
- Posts: 10
- Joined: Thu Nov 08, 2018 8:22 pm
- Has thanked: 1 time
- Been thanked: 2 times
I have no idea what the Wi-Fi chip is. On the board I see HS2734A and CoreELEC shows it as:
configuration: broadcast=yes driver=wl driverversion=0 multicast=yes wireless=IEEE 802.11
The USB Wi-Fi adapter I am using is TL-WN725N V3 (RTL8188EU).
configuration: broadcast=yes driver=wl driverversion=0 multicast=yes wireless=IEEE 802.11
The USB Wi-Fi adapter I am using is TL-WN725N V3 (RTL8188EU).