Hello.
I successfully installed the AtvXperience (really great job!) ROM onto my box (2GB RAM + 16GB ROM)
and almost everything is working...remote control works perfectly (of course, not voice commands).
But...wifi is not working.
Bluetooth works fine, instead.
I thought they were both broadcom based...same chip...
WIFI should be dual band (2.4GHz/5GHz)....does not detect any network
and when I try to activate it, the interface keeps on trying indefinitely....
Maybe, could I do something using ADB?
Any suggestion?
Thank you,
Goobang Doo Abox A2 S905X - wifi not working
-
- Administrator & Developer
- Posts: 1263
- Joined: Mon Jun 11, 2018 11:58 pm
- Has thanked: 192 times
- Been thanked: 434 times
- Contact:
Just above wlan driver box, these are all the files you need to copy paste.
Happy porting
BE NICE, BE RESPECTFUL
RESPECT THE MODERATORS
PM ONLY WHEN IMPORTANT
ENJOY! My Devices:
X96 Mini, A95X Pro, H96 Pro Stick, A95X Max
RESPECT THE MODERATORS
PM ONLY WHEN IMPORTANT
ENJOY! My Devices:
X96 Mini, A95X Pro, H96 Pro Stick, A95X Max
-
- Posts: 3
- Joined: Sat Dec 22, 2018 12:28 pm
I have little experience in android systems.
In linux, I could try to insert a module in the kernel with the driver for the wifi device.
I opened the box and I saw the communication card:
AP6330, from Ampak.
It integrates BCM 4330 wifi module
and BCM 40183 bluetooth module.
As I told before, bluetooth works so I should get the BCM 4330 driver (Broadcom).....
In linux, I could try to insert a module in the kernel with the driver for the wifi device.
I opened the box and I saw the communication card:
AP6330, from Ampak.
It integrates BCM 4330 wifi module
and BCM 40183 bluetooth module.
As I told before, bluetooth works so I should get the BCM 4330 driver (Broadcom).....
-
- Posts: 1
- Joined: Sat Feb 02, 2019 7:57 am
I was able to install onto my Abox A2 without any problems. WiFi works just fine for Kodi at 1080P; I can connect to both my 2.4GHz and 5GHz networks. I used atvXperience_S905X_V2H_A95X_FINAL with Burn Card Maker onto a 16GB MicroSD.
The first time I booted with the card the upgrade gave me a red X android dude, but it installed just fine after a power cycle.
For reference, the version of TWRP I used to back up my existing ROM has an MD5 of 46cb115fbe0d31c4ed3db72179963003 (google it)
The factory recovery said P212, but that's long gone and I haven't seen a factory IMG for this box.
The first time I booted with the card the upgrade gave me a red X android dude, but it installed just fine after a power cycle.
For reference, the version of TWRP I used to back up my existing ROM has an MD5 of 46cb115fbe0d31c4ed3db72179963003 (google it)
The factory recovery said P212, but that's long gone and I haven't seen a factory IMG for this box.