[phpBB Debug] PHP Warning: in file [ROOT]/ext/spaceace/ajaxchat/controller/chat.php on line 220: Trying to access array offset on value of type bool
atvXperience : The Forum • [ROM] Magicsee N5 - atvXperience v2 N5 Edition - Page 7
Page 7 of 8

[ROM] Magicsee N5 - atvXperience v2 N5 Edition

Posted: Sat May 16, 2020 12:27 pm
by kikko123
Buenos días.
Adquirí actualmente un Magicsee N5 y lo primero que hice fue cambiar la rom stock (que es horrible por cierto) por la ATVxperience V2 adaptada al N5.
Va genial salvo una cosa. El control remoto. Funciona bien mientras está encendido pero cuando lo apago no puedo encenderlo con el control remoto. Debo quitar y poner el cable power.
Alguna solución por favor ???

Gracias

[ROM] Magicsee N5 - atvXperience v2 N5 Edition

Posted: Mon May 18, 2020 11:19 am
by bumerc
kikko123 wrote: Sat May 16, 2020 12:27 pm Buenos días.
Adquirí actualmente un Magicsee N5 y lo primero que hice fue cambiar la rom stock (que es horrible por cierto) por la ATVxperience V2 adaptada al N5.
Va genial salvo una cosa. El control remoto. Funciona bien mientras está encendido pero cuando lo apago no puedo encenderlo con el control remoto. Debo quitar y poner el cable power.
Alguna solución por favor ???

Gracias
From now on, posts without proper translation will be deleted without warning, have respect for the team and translate your texts into English
thx

[ROM] Magicsee N5 - atvXperience v2 N5 Edition

Posted: Mon May 18, 2020 9:55 pm
by kikko123
Good Morning
I currently purchased a Magicsee N5 and the first thing I did was change the stock of rom (which is horrible by the way) for the ATVxperience V2 adapted to the N5.
It is great except for one thing. The remote control. It works fine while powered on but when I turn it off I can't turn it on with the remote. I must remove and put the power cord.
Any solution please?

Thank you

[ROM] Magicsee N5 - atvXperience v2 N5 Edition

Posted: Wed May 20, 2020 8:45 pm
by bumerc
You need a u-boot that contains the power key code of your remote control. Post your original remote.conf file here, we will integrate it into atv9 build

[ROM] Magicsee N5 - atvXperience v2 N5 Edition

Posted: Fri May 22, 2020 10:28 pm
by kikko123
These are the files I found on the original rom

[ROM] Magicsee N5 - atvXperience v2 N5 Edition

Posted: Fri May 22, 2020 10:37 pm
by kikko123
Remote.rar

[ROM] Magicsee N5 - atvXperience v2 N5 Edition

Posted: Tue May 26, 2020 3:38 pm
by em3ka
vinitroiano wrote: Tue May 26, 2020 2:18 pm ...i installed the rom, the USB Burning Tool no longer recognized my tv box...
Everything, in principle, is standard. The procedure is important.
1) Run the USB Burning Tool, select the original (or 100% working on this box) firmware. Click Start.
2) Clamp the reset on the box, apply external power through the power connector.
3) Short the 29th and 30th pins on NAND. In our boxing, this is the 5th and 6th pins after the triangle. Those. on the inductance side, marked 2R2.
4) Stick in the firmware cable. Boxing should be determined, and the firmware process should begin. Then everything is as usual.
[translation from: 4PDA.ru]

P1010004.jpg

[ROM] Magicsee N5 - atvXperience v2 N5 Edition

Posted: Tue May 26, 2020 4:01 pm
by kikko123
is there any solution for my problem. everything works very well for me. the problem is that I can't turn on the TV box with the remote control. everything else works great.

[ROM] Magicsee N5 - atvXperience v2 N5 Edition

Posted: Thu May 28, 2020 9:15 am
by kikko123
Good Morning. I found this other file in another official stock rom of the Magicsee n5
remote.conf

[ROM] Magicsee N5 - atvXperience v2 N5 Edition

Posted: Wed Jun 03, 2020 3:34 pm
by kikko123
Any solution to my problem? Thank you