[phpBB Debug] PHP Warning: in file [ROOT]/ext/spaceace/ajaxchat/controller/chat.php on line 220: Trying to access array offset on value of type bool
atvXperience : The Forum • MXQ PRO+
Page 1 of 7

BOX with WIFI/BT chip HS2734A

Posted: Tue Nov 06, 2018 8:58 am
by pierangelof
Hi,
I own a MXQ PRO+ box with S905X.
I would like to try your rom because the original one is buggy and I would like to know if the WIFI chip HS2734A is supported.

Thank you for your work.

BOX with WIFI/BT chip HS2734A

Posted: Tue Nov 06, 2018 10:27 am
by em3ka

BOX with WIFI/BT chip HS2734A

Posted: Tue Nov 06, 2018 8:04 pm
by Maki_SM
Try this img if you have blue board S905X version :
http://freaktab.com/forum/tv-player-sup ... ro-updated

BOX with WIFI/BT chip HS2734A

Posted: Tue Nov 06, 2018 8:09 pm
by Maki_SM
This img will work if you have S905X version with blue board
https://mega.nz/#F!gw4xiSwA!GfS9t3OfKAwPXvMQ127DCQ
thx to "minixfreak"

Last version v2FF not working , flashing is ok but box is stuck on splash startup..
Version v2F working

MXQ PRO+

Posted: Wed Mar 06, 2019 5:10 am
by SNAPB
Hello there everyone and thanks for the add...My problem is this...My box froze up on the Logo screen...So i tried updating the box using files and Burning Tool from Chinagadgets....I believe i used 2.0.8 Burning Tool and the file Nougat 7.1.2...MQX pro+ Mbox 7.1.2(16)HS2743A....2017.10.31.23.49....Twice it went to 95% then Failed.....My chip set is HS2743A.. MXQ_S905X_D4 V1.1..What file n loader from this site can i try...Any suggesting would be greatly appreciated.thnxs.

MXQ PRO+

Posted: Wed Mar 06, 2019 10:30 am
by bumerc
You have to be very careful with MXQ series. You never know exactly which processor was installed. Open the box and take a picture first

mxq pro+ s905x d4 v1.1 20170815 device troubles with atvx roms

Posted: Tue Mar 19, 2019 2:00 pm
by mxfreak
Hi,

I have lots of troubles with my mxq pro+ (2gb/16gb) in combination with atv xperience roms. (also tried redpoison)

I own a mxq s905x d4 v1.1 20170815 device buyed from https://www.geekbuying.com/item/MXQ-PRO ... 89334.html

Original roms from above link,i can flash with no problems with sdcard--> works great!
Usb burning tool will not work with original above roms (i can connect device to it,but it wont accept .imgs in usb burn tool,parseing error or something like that) ( atv roms in usb burning tools get 4 and 7 procent errors) --> works not,i dont care.

Twrp installed,original roms backuped full,i can restore and revert if i want.

Also if deviced is bricked or empty my flash i can insert my sdcard and flash/restore back my roms.

Also i had 2 times to reset my nand ( i had messed up with rebuilding roms in customizationtool) because it wont go on and had a red led and no screen output anymore.

This is my nand : skyhynix h26m52003eqr e-nand 426A

My cpu is : amlogic s905x quad core h-tva159.00

c63ed3962c.jpg

BUTTTT, i have seen today also this topic viewtopic.php?f=3&t=699 and what i see he has an identical motherboard like i have,ONLY he has a kingston nand (i have skyhynix) and this guy has also troubles.

Is there a solution possible for me?

Thank You !

mxq pro+ s905x d4 v1.1 20170815 device troubles with atvx roms

Posted: Tue Mar 19, 2019 9:02 pm
by bumerc
You have a standard eMMC memory 4.5. Important for porting is the exact type of RAM memory and the current dt-id of the bootloader, dt-id can also be extracted from the DTB. Unfortunately I can not recognize everything in your photo.

mxq pro+ s905x d4 v1.1 20170815 device troubles with atvx roms

Posted: Wed Mar 20, 2019 5:48 pm
by mxfreak
Thanks for your reply back, :*

I have extracted with customizationtool 6 a original image from the geekbuying url,and found some dt info/dirs on it,what do you need exactly?
And from which dir?

I also make pictures from both side of my mb where you can identify my memory ,please give me some time... :)

I`ll be back and thank you for your time.. O:-)

mxq pro+ s905x d4 v1.1 20170815 device troubles with atvx roms

Posted: Wed Mar 20, 2019 6:11 pm
by bumerc
Please try to find the currently used dt-id. I would not rely 100% on sellers :)

Enter this command in the terminal:

Code: Select all

cat /proc/device-tree/amlogic-dt-id
The command output might look something like this

Code: Select all

gxl_p212_xg