Hi,
I own S905X box with 2 GB Ram (MINI M8S II) and I'm not sure which version should I install? V2F or V2E (for 2GB+ RAM Devices)?
atvXperience S905X General Discussion
-
- Administrator & Developer
- Posts: 1263
- Joined: Mon Jun 11, 2018 11:58 pm
- Has thanked: 192 times
- Been thanked: 434 times
- Contact:
Yes, you can build zip with Ricky's customization tool
BE NICE, BE RESPECTFUL
RESPECT THE MODERATORS
PM ONLY WHEN IMPORTANT
ENJOY! My Devices:
X96 Mini, A95X Pro, H96 Pro Stick, A95X Max
RESPECT THE MODERATORS
PM ONLY WHEN IMPORTANT
ENJOY! My Devices:
X96 Mini, A95X Pro, H96 Pro Stick, A95X Max
-
- Posts: 2
- Joined: Thu Oct 18, 2018 12:19 am
Finally I install with Amlogic USB Burning Tool (http://www.tanix-box.com/124/how-to-flash-tanix-tx5/)
Thanks!
Thanks!
-
- Posts: 2
- Joined: Sat Nov 24, 2018 4:21 pm
Hi,
Can anyone help me?
I installed the V2FF firmware on the X96 box with 2 GB Ram (Amlogic S905X, p212 board)
Everything worked well until I turned off the box with the remote control.
After that, the lower navigation bar disappeared.
At the same time, in the settings of the box, the lower navigation bar remains ON, it is impossible to turn it Off though there is such an option.
I tried to reboot the box but it doesn't help.
Then I burned the box again with firmware V2FF
After that, the lower navigation bar appeared, but as soon as I turned off the box from the electricity or restart, it disappeared again, while in the box settings, the lower navigation bar is turned On
Can anyone help me?
I installed the V2FF firmware on the X96 box with 2 GB Ram (Amlogic S905X, p212 board)
Everything worked well until I turned off the box with the remote control.
After that, the lower navigation bar disappeared.
At the same time, in the settings of the box, the lower navigation bar remains ON, it is impossible to turn it Off though there is such an option.
I tried to reboot the box but it doesn't help.
Then I burned the box again with firmware V2FF
After that, the lower navigation bar appeared, but as soon as I turned off the box from the electricity or restart, it disappeared again, while in the box settings, the lower navigation bar is turned On
-
- Administrator & Developer
- Posts: 1263
- Joined: Mon Jun 11, 2018 11:58 pm
- Has thanked: 192 times
- Been thanked: 434 times
- Contact:
Use a mouse and swipe up from the bottom of the screen, it will appear.055dima wrote: ↑Sat Nov 24, 2018 6:31 pm Hi,
Can anyone help me?
I installed the V2FF firmware on the X96 box with 2 GB Ram (Amlogic S905X, p212 board)
Everything worked well until I turned off the box with the remote control.
After that, the lower navigation bar disappeared.
At the same time, in the settings of the box, the lower navigation bar remains ON, it is impossible to turn it Off though there is such an option.
I tried to reboot the box but it doesn't help.
Then I burned the box again with firmware V2FF
After that, the lower navigation bar appeared, but as soon as I turned off the box from the electricity or restart, it disappeared again, while in the box settings, the lower navigation bar is turned On
BE NICE, BE RESPECTFUL
RESPECT THE MODERATORS
PM ONLY WHEN IMPORTANT
ENJOY! My Devices:
X96 Mini, A95X Pro, H96 Pro Stick, A95X Max
RESPECT THE MODERATORS
PM ONLY WHEN IMPORTANT
ENJOY! My Devices:
X96 Mini, A95X Pro, H96 Pro Stick, A95X Max