atvXperience S905X General Discussion

[piterpen]

Nexbox A95X 2/16 s905x. Installed the latest firmware 2EE - recovery does not work, do not enter it, the native remote control does not work, bluetooth does not work. Everything else works great!

How to fix the problem with loading twrp in recovery, the prefix now only loads the system. How to fix the bluetooth and native remote control to work

[ricklar]

How to fix the problem with loading twrp in recovery, the prefix now only loads the system. How to fix the bluetooth and native remote control to work

1) Reinstall TWRP manually with a TWRP-recovery.img - Search the forum or Google for proper S905X_TWRP_recovery.img
2) Bluetooth problem may be in the Boot.img not matching your hardware or the drivers for the Bluetooth. You can try the TX7.zip fix once you get TWRP working, just search forum to find it, no guarantees it will work.
3) Remote either needs the remote.config binary from origianl firmware to be extracted and replaced in system partition, Or if some keys from remote work but just are the incorrect key operation then you need the 'Keylayouts' file from your original firmware.

Best suggestion is to just try the other firmwares V2F or V2FF, maybe they will have the correct remote files already installed.

[piterpen]

Reinstall TWRP manually with a TWRP-recovery.img

How to reinstall it if i cant boot in recovery mode? Thank you

[ricklar]

Well obviously install TWRP first, then you can try again.

Note: only the V2F firmware is formatted to be installed by SDcard Maker, can not use the V2FF which can only be installed with USB Burning Tool and USB-to-USB cable.

[cefaleia]

Hi, i have a mecool m8s pro+ with s905x. Which version of atvxperience should I use?

[em3ka]

[mention]cefaleia[/mention]
⚠ viewtopic.php?p=4512#p4512

First and foremost is, go to usb burning tool fixing guide and see point number 6.

- Repacking the firmware with different UBOOT files

[cefaleia]

[mention]cefaleia[/mention]
⚠ viewtopic.php?p=4512#p4512

First and foremost is, go to usb burning tool fixing guide and see point number 6.

- Repacking the firmware with different UBOOT files

hi, any tutorial to follow? I didn't understood very well.

[em3ka]

[mention]cefaleia[/mention]


Use customization tool to unpack the stock firmware to level1, save unpacked files for later,

Code: Select all

_aml_dtb.PARTITION
aml_sdc_burn.UBOOT
bootloader.PARTITION
DDR.USB
UBOOT.USB

now unpack atvX v2FF image to level1 and copy 5 saved files to to work folder level1 map,
repack to aml upgrade package .img ⬇

https://youtu.be/myv5MNy_5qg?t=43

[kingkayz]

Good day, I recently install atvexperience on my x96. Everything works fine but cast not working. Any fix?

[em3ka]

Everything works fine but cast not working. Any fix?

Use alternative casting apps. ⬇
viewtopic.php?p=10439#p10439