[phpBB Debug] PHP Warning: in file [ROOT]/ext/spaceace/ajaxchat/controller/chat.php on line 220: Trying to access array offset on value of type bool
atvXperience : The Forum • atvXperience S905X General Discussion - Page 14
Page 14 of 21

atvXperience S905X General Discussion

Posted: Tue Sep 10, 2019 12:39 pm
by piterpen
Nexbox A95X 2/16 s905x. Installed the latest firmware 2EE - recovery does not work, do not enter it, the native remote control does not work, bluetooth does not work. Everything else works great!

How to fix the problem with loading twrp in recovery, the prefix now only loads the system. How to fix the bluetooth and native remote control to work

atvXperience S905X General Discussion

Posted: Thu Sep 12, 2019 12:18 pm
by ricklar
piterpen wrote: Tue Sep 10, 2019 12:39 pm How to fix the problem with loading twrp in recovery, the prefix now only loads the system. How to fix the bluetooth and native remote control to work
1) Reinstall TWRP manually with a TWRP-recovery.img - Search the forum or Google for proper S905X_TWRP_recovery.img
2) Bluetooth problem may be in the Boot.img not matching your hardware or the drivers for the Bluetooth. You can try the TX7.zip fix once you get TWRP working, just search forum to find it, no guarantees it will work.
3) Remote either needs the remote.config binary from origianl firmware to be extracted and replaced in system partition, Or if some keys from remote work but just are the incorrect key operation then you need the 'Keylayouts' file from your original firmware.

Best suggestion is to just try the other firmwares V2F or V2FF, maybe they will have the correct remote files already installed.

atvXperience S905X General Discussion

Posted: Thu Sep 12, 2019 1:24 pm
by piterpen
ricklar wrote: Thu Sep 12, 2019 12:18 pm Reinstall TWRP manually with a TWRP-recovery.img
How to reinstall it if i cant boot in recovery mode? Thank you

atvXperience S905X General Discussion

Posted: Fri Sep 13, 2019 3:04 am
by ricklar
Well obviously install TWRP first, then you can try again.

Note: only the V2F firmware is formatted to be installed by SDcard Maker, can not use the V2FF which can only be installed with USB Burning Tool and USB-to-USB cable.

atvXperience S905X General Discussion

Posted: Thu Sep 26, 2019 2:35 pm
by cefaleia
Hi, i have a mecool m8s pro+ with s905x. Which version of atvxperience should I use?

atvXperience S905X General Discussion

Posted: Thu Sep 26, 2019 8:14 pm
by em3ka
[mention]cefaleia[/mention]
viewtopic.php?p=4512#p4512
Nayam wrote: Mon Feb 11, 2019 9:22 pm First and foremost is, go to usb burning tool fixing guide and see point number 6.
- Repacking the firmware with different UBOOT files

atvXperience S905X General Discussion

Posted: Thu Oct 31, 2019 4:12 pm
by cefaleia
em3ka wrote: Thu Sep 26, 2019 8:14 pm [mention]cefaleia[/mention]
viewtopic.php?p=4512#p4512
Nayam wrote: Mon Feb 11, 2019 9:22 pm First and foremost is, go to usb burning tool fixing guide and see point number 6.
- Repacking the firmware with different UBOOT files
hi, any tutorial to follow? I didn't understood very well.

atvXperience S905X General Discussion

Posted: Thu Oct 31, 2019 5:25 pm
by em3ka
[mention]cefaleia[/mention]
Image

Use customization tool to unpack the stock firmware to level1, save unpacked files for later,

Code: Select all

_aml_dtb.PARTITION
aml_sdc_burn.UBOOT
bootloader.PARTITION
DDR.USB
UBOOT.USB
now unpack atvX v2FF image to level1 and copy 5 saved files to to work folder level1 map,
repack to aml upgrade package .img ⬇

https://youtu.be/myv5MNy_5qg?t=43

atvXperience S905X General Discussion

Posted: Sat Dec 21, 2019 7:06 pm
by kingkayz
Good day, I recently install atvexperience on my x96. Everything works fine but cast not working. Any fix?

atvXperience S905X General Discussion

Posted: Sat Dec 21, 2019 9:09 pm
by em3ka
kingkayz wrote: Sat Dec 21, 2019 7:06 pm Everything works fine but cast not working. Any fix?
Use alternative casting apps.
viewtopic.php?p=10439#p10439