T95Z not connecting to Ethernet?

[bumerc]

[mention]jalbstmeijer[/mention]

[blindm0use]

Hi there everyone! I was successful solving the Ethernet issue on my X92 on ATVXperience ROMs by the following actions:

1. Unpacked Vorke Z6 Clean ROM with "AML Customization Tool" by "level1" and extracted "_aml_dtb.PARTITION" from tmp>level1 folder;
2. Unpacked ATVXperience ROM with "AML Customization Tool" by "level1" and then replaced old "_aml_dtb.PARTITION" with the new one extracted from Vorke Z6 Clean ROM in "level1" folder (works with any android 7 ROM you wish to install on X92 - TESTED );
3. Repacked files into "aml upgrade package" with "AML Customization Tool" and installed with "USB Burning Tool".

Sharing DTB file with all of you, guys, hope it would help some of you! SOLVED FOR X92!

[jalbstmeijer]

@bumerc , thanks. The gxm_q201_3g.dtb.zip worked for me!.

Any change you could tell how to fix/create these dtb files our selves?

[aussiebill]

bumerc

Hi bumerc. I am a noob to all this but I would like to fix the ethernet issue on my T95Z with ATVXperience. If you can help, I would greatly appreciate any information you can provide. How do I upload the gxm_q201_3g.dtb.zip file to my android box. I was able to flash the rom and it works great, but my ethernet port does not work. Thanks

[em3ka]

[mention]aussiebill[/mention], how to fixinhg the ethernet, anwser by [mention]blindm0use[/mention] two posts above.

[juffe]

Can someone help me. I have T95Z 2/16 plus with ltm8030 wifi. Ethernet did not work with 1gb, only if I connect it to 100mb router, then it work.
I tried several dtb files, but nothing works. Then I unpacked original working rom and I copy dtb from level1 folder. It did not work.

This is dtb is from working original firmware. https://mega.nz/#!e6oyHCoR!5WOXYxrKtRuP ... J-_WUXl9N0
Do I need to edit it somehow?

What I need to try next?

This is picture of board. There is H82409S ethernet.
https://mega.nz/#!DyRklSra!O50sNItOgQZ3 ... DVTjUifmig

[juffe]

Im finally figure out what was the propblem
I convert _aml_dtb.PARTITION to three different dtb files with https://github.com/PabloCastellano/extract-dtb

Then I convert 02_dtb to dts, then remove line "cali_val = < 0x20000 >;" from dts, then repack to dtb and gigabit ethernet is working!
There is link to repacked img
https://mega.nz/#F!HjIGHKgY!Vtzs_Vtx3GkXEjQk8bG1_w

[SRG73]

Hey. I have a H96 Pro 2/16 DDR3 (Not LP). Ethernet does not work for me. In the logs of the router (Mikrotik) it is written that link up, but then nothing happens. Ip address is not assigned (I have DHCP). I wanted to use dtb from the topic, but they are either 1g or 3g. The link to multi_dtb is dead. Can I count on help here?
P.S. sorry for my english i'm using google translate