Hello,
I get the black screen when using the latest atvXperience_v2F_s912 firmware.
I installed an other firmware and it works (SCV1-ATV-Test1-Blue-PCB-H96ProPlus)
Here is my setup:
32G SD Card used to update the firmware
Alfawise H96 Pro+ Blue PCB - 3G - 32G - 9377 /2017/008
New firmware updated with Black Screen on Alfawise S912 Pro+
-
- Administrator & Developer
- Posts: 1551
- Joined: Tue Oct 02, 2018 6:19 pm
- Has thanked: 211 times
- Been thanked: 334 times
[mention]breweryfr[/mention]
You have a LPDDR3 RAM memory, this is currently not supported by the atvX-Bootloader.
Devices with LPDDR3 and DDR4 require a BL update.
You have the following options:
1. You are waiting for an update from atvX-Team. 2. You can manually replace the BL by repackaging the atvX * .img.
3. You replace the BL by console command.
4. You replace the BL in developer mode via UART
interface.
You have a LPDDR3 RAM memory, this is currently not supported by the atvX-Bootloader.
Devices with LPDDR3 and DDR4 require a BL update.
You have the following options:
1. You are waiting for an update from atvX-Team. 2. You can manually replace the BL by repackaging the atvX * .img.
3. You replace the BL by console command.
4. You replace the BL in developer mode via UART
interface.