[DISCUSSION] Sunvell T95Z Max TV Box

[bumerc]

[mention]etzka[/mention]
This version is not intended for T95Z (see comment), it contains a bootloader with additional PHY driver and integrated WOL function. Please post your working DTB.

[ricklar]

[mention]bumerc[/mention] , "atvXperience_s912_t95z_lpddr3_v2g.img" this version stops on installing in the end.
"atvXperience_s912_lpddr3_v2g.img"- this version works with my original dtb file(I repacked image with my dtb).
But there is is problems too.I cant do restart for my box, because then its often stucks on atwx logo, sometimes boot to the end. Have problems with 4k system resolution. Often box frezees , rebooting, than freezes again, or rebooting, then stuck on atvx logo, when auto rebooting normaly, android UI view appears only on 1/4 screen. Now I set 1080p resolution, and all is right for now. HDMI CEC, again, not working correctly. My tv wake up my box, but my box dont wakeup my tv, because when box are sleeping, its not reacting to remote commands.

And one more think. How to dissable interlacing on 1080i h264 mpeg4 avc videos( iptv), because aml-h264 codec has a bug or something, because view is full of horizontal red strings, but not always. On original rom, I used „Amlogic TV Box tool“ to disable it. But this app on atvx not working correctly.

Have you tried the "S912-A1_Fixed.img" from Adam's roms, the A1 device is supposed to have LPDDR3 ram, that version of the firmware may work for you.

[bumerc]

[mention]etzka[/mention]
I have reloaded the * .img file.
Please test the CEC function again.
Display resolution is set to 2160p60hz by default.
Front Display Support temporarily removed.
Updated DTB.

[etzka]

Have you tried the "S912-A1_Fixed.img" from Adam's roms, the A1 device is supposed to have LPDDR3 ram, that version of the firmware may work for you.

I will try it.

[etzka]

Please post your working DTB.

here it is:
http://s000.tinyupload.com/?file_id=062 ... 1855013532

[etzka]

[mention]etzka[/mention]
I have reloaded the * .img file.
Please test the CEC function again.
Display resolution is set to 2160p60hz by default.
Front Display Support temporarily removed.
Updated DTB.

This time cec working fine, for now, but i'll do more testing. After flashing rom, first boot was very hard. I had to pull out and in power for maybe 5 times, because its stucking on atvx logo. After that, rebooting works fine, I'll do more testing too.

update

after more time, I see that, system freezess quite a lot.

[val1950]

Works for me experimental, only no root

[bumerc]

[mention]etzka[/mention]
I have reloaded the * .img file.
Please test the CEC function again.
Display resolution is set to 2160p60hz by default.
Front Display Support temporarily removed.
Updated DTB.

This time cec working fine, for now, but i'll do more testing. After flashing rom, first boot was very hard. I had to pull out and in power for maybe 5 times, because its stucking on atvx logo. After that, rebooting works fine, I'll do more testing too.

update

after more time, I see that, system freezess quite a lot.

Like I said, it's because of using a preemptible kernel. Run the Logcat to see which application/service is causing system freezers, maybe you can just disable it.

[kick]

@etzka @kick
Enclosed the Version 2G (LPDDR3 only)

Install
- ABT
or
- SDcard

Hi bumerc, finally had a chance to try this. Verified that I was currently on 7.1.2 of stock firmware first. Flashed USB method and it said success. Again, the box is not recognized by the television nor the pc when I plug back in. What's worse is that I can no longer short nand. So I'm at a loss as to what to do next. Any suggestions?

[bumerc]

[mention]kick[/mention]
Do you have a 4k TV or only Full HD? The resolution has been set to 2160p60hz default in this build. Post the link to the stock FW.