Is it the only way get a bootloader log? May I get it by recovery?@s_anton93
Yes, you need bootloader log via uart
[DISCUSSION] Sunvell T95Z Max TV Box
-
- Administrator & Developer
- Posts: 1551
- Joined: Tue Oct 02, 2018 6:19 pm
- Has thanked: 211 times
- Been thanked: 334 times
Simply copy the complete log into a text file or post it on pastebin.com. I need the log from the stock ROM.etzka wrote: ↑Thu Nov 15, 2018 3:23 pmand in which app do you open these log files? With notepad, there are all nonsense, not readable...
-
- Experienced Member
- Posts: 99
- Joined: Sat Sep 15, 2018 11:10 am
- Has thanked: 1 time
- Been thanked: 4 times
Its working
https://pastebin.com/uXKg0fiW
but firmware is not original my box, but works, its t95z plus firmware, because I dont have original firmware, and I dont finding that....
-
- Administrator & Developer
- Posts: 1551
- Joined: Tue Oct 02, 2018 6:19 pm
- Has thanked: 211 times
- Been thanked: 334 times
[mention]etzka[/mention]
Ok, you have 3gb LPDDR3, running at slightly low clk rate 720Mhz. What exactly do you have problem with your box? Unfortunately, I can not remember all the problems posted here
Ok, you have 3gb LPDDR3, running at slightly low clk rate 720Mhz. What exactly do you have problem with your box? Unfortunately, I can not remember all the problems posted here
-
- Experienced Member
- Posts: 99
- Joined: Sat Sep 15, 2018 11:10 am
- Has thanked: 1 time
- Been thanked: 4 times
smart youtube, webxperience always opens then close( I need smart youtube for watch 4k),
second time restart box, and now its stops booting, only show "vorke" logo. Why "vorke", its sunvell
HDMI CEC function working incorectly. I am using original tv remote, and when I turnoff tv, then box sleep too. When I turn on tv, box dont wake up. I have to pull out and pull in power charging adapter from the back of tv box.
system freezes and crashing 1-5 times per day...
sometimes crashing backing up from sleep.
when box goes to sleep, never get up, I have to pull down and up power cord, and then 5 of 6 times box stops on booting with vorke logo.
All these isues are with original v2ff lpddr3 version
-
- Administrator & Developer
- Posts: 1551
- Joined: Tue Oct 02, 2018 6:19 pm
- Has thanked: 211 times
- Been thanked: 334 times
[mention]etzka[/mention]
Did you use the "Erase Flash" option?
Did you write the DTD file by hand into the eMMC?
Do you use external storage devices?
I'm doing a little update for testing.
Did you use the "Erase Flash" option?
Did you write the DTD file by hand into the eMMC?
Do you use external storage devices?
I'm doing a little update for testing.
-
- Experienced Member
- Posts: 99
- Joined: Sat Sep 15, 2018 11:10 am
- Has thanked: 1 time
- Been thanked: 4 times
Yes, always using "erase flash" option.
Flashing with burning tool or sd card, and I do nothing more, I dont know what is DTD file
Yes I am using external hdd with otg cable with additional power source, because directly box has problem with it, always restarting when I plug in hdd usb cable with original firmware. With atvx v2ff original, always restarting and then stucking on boot. With others boxes and same hdd, there were no problems.