[DISCUSSION] Sunvell T95Z Max TV Box

H96 Pro, X98 Pro, TX9 Pro to name a few...
Post Reply
bumerc
Administrator & Developer
Posts: 1551
Joined: Tue Oct 02, 2018 6:19 pm
Answers: 0
Has thanked: 211 times
Been thanked: 334 times

#61

papla83 wrote: ↑Tue Oct 30, 2018 8:58 pm
etzka wrote: ↑Tue Oct 30, 2018 7:48 pm
bumerc wrote: ↑Tue Oct 30, 2018 5:46 pm @papla83 @etzka
Another build (The built-in bootloader in this build has been tested on a H96Pro + V6 device and is running fine). If it did not run on your device, it would mean you have a standard DDR3 device.

Download
another error on 7percent

Code: Select all

-------------ERASE FLASH-----------
[21:44:53 953][HUB2-2][Inf]--disk_initial 1
[21:44:53 953][HUB2-2][Inf]--Send command success
[21:44:54 006][HUB2-2][Err]--failed:[21:44:54 006][HUB2-2][Err]--Check command return failed
[21:44:54 022][HUB2-2][Err]--[0x30201004]UBOOT/Disk initialize/Send command/Error result
[21:44:54 022][HUB2-2][Inf]--Close device handle 0x00000e04

perhaps H96Pro dont have 3+32gb version( mine is 3+32gb)
Mine is Tanix TX9pro 3gb 32Gb Too
I'm afraid TX9 Pro has a normal DDR3 memory, not an LP. Take PCB photos.
Top
papla83
Expert Member
Posts: 125
Joined: Wed Oct 03, 2018 9:43 pm
Answers: 0
Has thanked: 15 times
Been thanked: 4 times

#62

[img]
bumerc wrote: ↑Wed Oct 31, 2018 6:31 am
papla83 wrote: ↑Tue Oct 30, 2018 8:58 pm
etzka wrote: ↑Tue Oct 30, 2018 7:48 pm
another error on 7percent

Code: Select all

-------------ERASE FLASH-----------
[21:44:53 953][HUB2-2][Inf]--disk_initial 1
[21:44:53 953][HUB2-2][Inf]--Send command success
[21:44:54 006][HUB2-2][Err]--failed:[21:44:54 006][HUB2-2][Err]--Check command return failed
[21:44:54 022][HUB2-2][Err]--[0x30201004]UBOOT/Disk initialize/Send command/Error result
[21:44:54 022][HUB2-2][Inf]--Close device handle 0x00000e04

perhaps H96Pro dont have 3+32gb version( mine is 3+32gb)
Mine is Tanix TX9pro 3gb 32Gb Too
I'm afraid TX9 Pro has a normal DDR3 memory, not an LP. Take PCB photos.
[mention]papla83[/mention]

https://photos.app.goo.gl/kgWJMmLnVq5x2xUKA
Top
User avatar
em3ka
Moderator
Posts: 1835
Joined: Sun Jul 15, 2018 11:43 am
Answers: 0
Has thanked: 108 times
Been thanked: 370 times

#63

Tanix TX9 Pro = LPDDR3 (diffrent manufactures)

SanDisk
Image

Samsung
Image

[FreakTab]
Top
bumerc
Administrator & Developer
Posts: 1551
Joined: Tue Oct 02, 2018 6:19 pm
Answers: 0
Has thanked: 211 times
Been thanked: 334 times

#64

Okay, it's actually LPDDR3 memory. I found the bug, the problem is with the aml-linux-toolkit, which I use for packing the * .img. I will consider how to fix the problem.
Top
etzka
Experienced Member
Posts: 99
Joined: Sat Sep 15, 2018 11:10 am
Answers: 0
Has thanked: 1 time
Been thanked: 4 times

#65

bumerc wrote: ↑Wed Oct 31, 2018 8:34 am Okay, it's actually LPDDR3 memory. I found the bug, the problem is with the aml-linux-toolkit, which I use for packing the * .img. I will consider how to fix the problem.
any news?
Top
bumerc
Administrator & Developer
Posts: 1551
Joined: Tue Oct 02, 2018 6:19 pm
Answers: 0
Has thanked: 211 times
Been thanked: 334 times

#66

etzka wrote: ↑Wed Oct 31, 2018 7:41 pm
bumerc wrote: ↑Wed Oct 31, 2018 8:34 am Okay, it's actually LPDDR3 memory. I found the bug, the problem is with the aml-linux-toolkit, which I use for packing the * .img. I will consider how to fix the problem.
any news?
Installation via Aml USB Burning Tool
s912_test_lpddr3.img

Installation via SDcard (Amlogic Burn_Card_Maker)
aml_upgrade_package.img
Top
etzka
Experienced Member
Posts: 99
Joined: Sat Sep 15, 2018 11:10 am
Answers: 0
Has thanked: 1 time
Been thanked: 4 times

#67

bumerc wrote: ↑Wed Oct 31, 2018 8:59 pm
etzka wrote: ↑Wed Oct 31, 2018 7:41 pm
bumerc wrote: ↑Wed Oct 31, 2018 8:34 am Okay, it's actually LPDDR3 memory. I found the bug, the problem is with the aml-linux-toolkit, which I use for packing the * .img. I will consider how to fix the problem.
any news?
Installation via Aml USB Burning Tool
s912_test_lpddr3.img

Installation via SDcard (Amlogic Burn_Card_Maker)
aml_upgrade_package.img
wtf :-. :-. :-. :confounded: :confounded: , now my box not turning on, without sign of life

error on 99percent, flashing with burning tools, I think its a cheksum error :)

Code: Select all

[23:32:57 643][HUB2-2][Inf]-------------Download recovery.PARTITION-----------
[23:32:57 643][HUB2-2][Inf]--0-7-0-16
[23:32:57 643][HUB2-2][Inf]--download store recovery normal 14442496
[23:32:57 643][HUB2-2][Inf]--Send download command success
[23:32:57 658][HUB2-2][Inf]--Read command status success
[23:32:59 174][HUB2-2][Inf]--Transfer complete
[23:32:59 174][HUB2-2][Inf]--Send download get_status command succeed
[23:32:59 178][HUB2-2][Inf]--get_status success
[23:32:59 178][HUB2-2][Inf]--verify sha1sum 1a9dfbea9f151dfb30e5fcc5f03d71d2923ecbd0
[23:32:59 178][HUB2-2][Inf]--Send verify cmd succeed
[23:32:59 788][HUB2-2][Inf]--Get verify status success
[23:33:00 306][HUB2-2][Inf]-------------Download system.PARTITION-----------
[23:33:00 306][HUB2-2][Inf]--0-7-0-16
[23:33:00 306][HUB2-2][Inf]--download store system sparse 1220654368
[23:33:00 306][HUB2-2][Inf]--Send download command success
[23:33:00 322][HUB2-2][Inf]--Read command status success
[23:35:04 474][HUB2-2][Inf]--Transfer complete
[23:35:04 474][HUB2-2][Inf]--Send download get_status command succeed
[23:35:04 474][HUB2-2][Inf]--get_status success
[23:35:04 474][HUB2-2][Inf]--verify sha1sum 5d7430c8e49273a26d9a21d095c48bfabe983d31
[23:35:04 474][HUB2-2][Inf]--Send verify cmd succeed
[23:35:55 491][HUB2-2][Err]--failed:Verify Failed with sha1sum, origin sum "5d7430c8e49273a26d9a21d095c48bfabe983d31" != gen sum "01d698de84460db870a7ac5eae38b2422f507647"

[23:35:55 507][HUB2-2][Err]--[0x30405004]UBOOT/Partition system/Verify patition/Error result
[23:35:55 507][HUB2-2][Inf]--Close device handle 0x0000097c
Top
papla83
Expert Member
Posts: 125
Joined: Wed Oct 03, 2018 9:43 pm
Answers: 0
Has thanked: 15 times
Been thanked: 4 times

#68

etzka wrote: ↑Wed Oct 31, 2018 9:42 pm
bumerc wrote: ↑Wed Oct 31, 2018 8:59 pm
etzka wrote: ↑Wed Oct 31, 2018 7:41 pm
any news?
Installation via Aml USB Burning Tool
s912_test_lpddr3.img

Installation via SDcard (Amlogic Burn_Card_Maker)
aml_upgrade_package.img
wtf :-. :-. :-. :confounded: :confounded: , now my box not turning on, without sign of life

error on 99percent, flashing with burning tools, I think its a cheksum error :)

Code: Select all

[23:32:57 643][HUB2-2][Inf]-------------Download recovery.PARTITION-----------
[23:32:57 643][HUB2-2][Inf]--0-7-0-16
[23:32:57 643][HUB2-2][Inf]--download store recovery normal 14442496
[23:32:57 643][HUB2-2][Inf]--Send download command success
[23:32:57 658][HUB2-2][Inf]--Read command status success
[23:32:59 174][HUB2-2][Inf]--Transfer complete
[23:32:59 174][HUB2-2][Inf]--Send download get_status command succeed
[23:32:59 178][HUB2-2][Inf]--get_status success
[23:32:59 178][HUB2-2][Inf]--verify sha1sum 1a9dfbea9f151dfb30e5fcc5f03d71d2923ecbd0
[23:32:59 178][HUB2-2][Inf]--Send verify cmd succeed
[23:32:59 788][HUB2-2][Inf]--Get verify status success
[23:33:00 306][HUB2-2][Inf]-------------Download system.PARTITION-----------
[23:33:00 306][HUB2-2][Inf]--0-7-0-16
[23:33:00 306][HUB2-2][Inf]--download store system sparse 1220654368
[23:33:00 306][HUB2-2][Inf]--Send download command success
[23:33:00 322][HUB2-2][Inf]--Read command status success
[23:35:04 474][HUB2-2][Inf]--Transfer complete
[23:35:04 474][HUB2-2][Inf]--Send download get_status command succeed
[23:35:04 474][HUB2-2][Inf]--get_status success
[23:35:04 474][HUB2-2][Inf]--verify sha1sum 5d7430c8e49273a26d9a21d095c48bfabe983d31
[23:35:04 474][HUB2-2][Inf]--Send verify cmd succeed
[23:35:55 491][HUB2-2][Err]--failed:Verify Failed with sha1sum, origin sum "5d7430c8e49273a26d9a21d095c48bfabe983d31" != gen sum "01d698de84460db870a7ac5eae38b2422f507647"

[23:35:55 507][HUB2-2][Err]--[0x30405004]UBOOT/Partition system/Verify patition/Error result
[23:35:55 507][HUB2-2][Inf]--Close device handle 0x0000097c
in my case burn with success :grinning:
Top
etzka
Experienced Member
Posts: 99
Joined: Sat Sep 15, 2018 11:10 am
Answers: 0
Has thanked: 1 time
Been thanked: 4 times

#69

[mention]papla83[/mention] you flashed with sd card or burning tools?
Top
papla83
Expert Member
Posts: 125
Joined: Wed Oct 03, 2018 9:43 pm
Answers: 0
Has thanked: 15 times
Been thanked: 4 times

#70

etzka wrote: ↑Wed Oct 31, 2018 10:55 pm [mention]papla83[/mention] you flashed with sd card or burning tools?
burning
Last edited by papla83 on Wed Oct 31, 2018 11:16 pm, edited 1 time in total.
Top
Post Reply

Return to “S912”