[DISCUSSION] Sunvell T95Z Max TV Box

H96 Pro, X98 Pro, TX9 Pro to name a few...
Post Reply
Mastermark
Posts: 3
Joined: Sun Nov 11, 2018 12:00 am

Sunvell T95Z Max TV Box 3GB 32GB

Post by Mastermark » Wed Nov 21, 2018 4:36 pm

Anyone have the original Firmware from T95Z Max 3gb 32gb

etzka
Experienced Member
Posts: 74
Joined: Sat Sep 15, 2018 11:10 am
Has thanked: 1 time
Been thanked: 2 times

Post by etzka » Wed Nov 21, 2018 4:39 pm

Mastermark wrote:
Wed Nov 21, 2018 4:36 pm
Anyone have the original Firmware from T95Z Max 3gb 32gb
I need it too, but cant find it anywhere

papla83
Experienced Member
Posts: 67
Joined: Wed Oct 03, 2018 9:43 pm
Has thanked: 8 times
Been thanked: 2 times

Post by papla83 » Wed Nov 21, 2018 10:27 pm

etzka wrote:
Wed Nov 21, 2018 7:40 am
bumerc wrote:
Fri Nov 02, 2018 11:43 am
Adam's build LPDDR3.
- fix aml_usb_burning_tool installation
(For waking up via IR remote I need original remote.conf file)
Donload
if you speak about this @papla83 , then I tryed it. Stuck on boot
Really strange.
Maybe @bumerc know how mod the adams LPDDR3 to have a success with boot on your device.
In my case the adam's Rom is the only one can run the app without issue so the solution should be to understand why on somes roms the apps close directly and works nice on adam's rom.

etzka
Experienced Member
Posts: 74
Joined: Sat Sep 15, 2018 11:10 am
Has thanked: 1 time
Been thanked: 2 times

Post by etzka » Thu Nov 22, 2018 12:14 pm

@bumerc , I flashed once again Adam lpddr3 rom to show whats wrong(stuck on boot, always show atwx logo), here is the boot log with putty
https://pastebin.com/uXtfkAUV
another part
https://pastebin.com/m4c2HuD2

bumerc
Moderator
Posts: 118
Joined: Tue Oct 02, 2018 6:19 pm
Has thanked: 3 times
Been thanked: 10 times

Post by bumerc » Thu Nov 22, 2018 6:57 pm

etzka wrote:
Thu Nov 22, 2018 12:14 pm
@bumerc , I flashed once again Adam lpddr3 rom to show whats wrong(stuck on boot, always show atwx logo), here is the boot log with putty
https://pastebin.com/uXtfkAUV
another part
https://pastebin.com/m4c2HuD2
eMMC initialization fails, it could indicate a defect of the eMMC chip. Driver problem is unlikely, but possible.

etzka
Experienced Member
Posts: 74
Joined: Sat Sep 15, 2018 11:10 am
Has thanked: 1 time
Been thanked: 2 times

Post by etzka » Thu Nov 22, 2018 7:13 pm

bumerc wrote:
Thu Nov 22, 2018 6:57 pm
etzka wrote:
Thu Nov 22, 2018 12:14 pm
@bumerc , I flashed once again Adam lpddr3 rom to show whats wrong(stuck on boot, always show atwx logo), here is the boot log with putty
https://pastebin.com/uXtfkAUV
another part
https://pastebin.com/m4c2HuD2
eMMC initialization fails, it could indicate a defect of the eMMC chip. Driver problem is unlikely, but possible.
But when I flash box with t95z plus firmware, it goes without problem, boot without problem.

bumerc
Moderator
Posts: 118
Joined: Tue Oct 02, 2018 6:19 pm
Has thanked: 3 times
Been thanked: 10 times

Post by bumerc » Thu Nov 22, 2018 7:54 pm

The size of the firmware is different, apparently overwriting other memory cells that are not damaged.

etzka
Experienced Member
Posts: 74
Joined: Sat Sep 15, 2018 11:10 am
Has thanked: 1 time
Been thanked: 2 times

Post by etzka » Thu Nov 22, 2018 8:02 pm

bumerc wrote:
Thu Nov 22, 2018 7:54 pm
The size of the firmware is different, apparently overwriting other memory cells that are not damaged.
But original atvx v2ff lpddr3 version size is bigger, than Adam version. But atvx v2ff boots to the end.

bumerc
Moderator
Posts: 118
Joined: Tue Oct 02, 2018 6:19 pm
Has thanked: 3 times
Been thanked: 10 times

Post by bumerc » Sun Nov 25, 2018 2:55 pm

Applications work, Bluetooth, Wi-Fi, Eth PHY, HDMI-CEC, IR remote control, waking up by remote control.
@etzka , use the SDcard method, activate option "force erase Flash", or replace the * .ini file. Option "erase Bootloader" not select, the u-boot is installed without this.

Tested on H96Pro+

Note - the archive * .tar.gz may need to be extracted twice.
atvx_s912_LPDDR_v2ff.img.tar.gz

etzka
Experienced Member
Posts: 74
Joined: Sat Sep 15, 2018 11:10 am
Has thanked: 1 time
Been thanked: 2 times

Post by etzka » Sun Nov 25, 2018 4:40 pm

bumerc wrote:
Sun Nov 25, 2018 2:55 pm
Applications work, Bluetooth, Wi-Fi, Eth PHY, HDMI-CEC, IR remote control, waking up by remote control.
@etzka , use the SDcard method, activate option "force erase Flash", or replace the * .ini file. Option "erase Bootloader" not select, the u-boot is installed without this.

Tested on H96Pro+

Note - the archive * .tar.gz may need to be extracted twice.
atvx_s912_LPDDR_v2ff.img.tar.gz
Thanks for your work, but its stops on upgrading
Here is upgrade log with putty - https://pastebin.com/jmtL4bE0

Post Reply