adam's personnal rom

[AxEgo]

Thank you.

Are the Adam's Personal builds the official version or should we wait for an official release?

[Nayam]

Thank you.

Are the Adam's Personal builds the official version or should we wait for an official release?

Kind of both, the final versions go through me.

[dishme]

atvXperience_V2G_S912_9377ONLY_FIXED does not start. After burn I start it it shows boot logo and then wait 25min black screen. Could Adam check.

On my H96 Pro Plus, 9377 chipset, I have the same issue.

[TrON7777]

Which Rom can i install on Beelink Gt1 Standard???

Open your device and make sure you identify the ram chip type.
Either standard ddr or LPDDR.
Try the new V2G for your Ram type with Adam's custom variants:
https://www.atvxperience.com/download/a ... y-devices/#

Product description
& # x2022; bases
Condition: New
Release Date: August 2016
Product Model: GT1
Dimension: 96 * 96 * 16 mm
Number of processor: Amlogic s912
& # x2022; System Config
Android operating system 6.0 network language: multi language
CPU: Octa Core CPU Amlogic s912 arm cortex-a53 up to 2 GHz (DVFS)
GPU ARM mali-t820mp3 GPU up to 750 MHz (DVFS)
RAM: 2 GB DDR3
ROM: Onboard eMMC Flash 32 GB
Wi-Fi: IEEE 802.11 a/b/g/n/ac 2.4 G, 5.8 G + + AC Hotel BT: BT 4.0 < br > Antenna: WIFI built-in antenna
Expand Memory: Micro SD card (Maximum support 32 GB)
& # x2022; Button and ports
Button: Power button (no connection sources of power, the operation of the automated system) < br > DC-in: 1 * DC in port of USB 2.0: 2 * Standard USB port
HD: 1 * RJ45 port type HD
: 1 * RJ45 (1000 Mbps network connection)
SPDIF: 1 * S/SPDIF (5.1 ch, 7.1 CH) TF card slot
: 1 * Micro SD card slot
LED Power: Power LED 1 * with two colour - & # x2022; Powerful capabilities of codec
UHD 4 K 60 fps HW decoding, supports multiple formats, including 10 bit H.265, H.264 and AVS + FHD 1080P 60 FPS HW Encryption, supports H.264
& # x2022; administration of energy
Adapter: DC 5 V 2 A (100 -240 V, 50/60 Hz)
& # x2022; Environment
Working environment: 5 °C - 35 °C, 30% - 90% Humidity
Storage environment: -20 °C - 60 °C, Humidity 10% - 90%
Package Content: 1 x English Manual
1 x Beelink GT1 TV Box
The USA adapter 1 x Cable 1 x HD

Which Rom can i install on Beelink Gt1 Standard???

[Ico747]

atvXperience_V2G_S912_9377ONLY_FIXED does not start. After burn I start it it shows boot logo and then wait 25min black screen. Could Adam check.

On my H96 Pro Plus, 9377 chipset, I have the same issue.

Install atvXperience_V2G_S912_FIXED.img. The only problem is Bluetooth. Use patch below to fix it.

[ricklar]

Which Rom can i install on Beelink Gt1 Standard???

Open your device and make sure you identify the ram chip type.
Either standard ddr or LPDDR.
Try the new V2G for your Ram type with Adam's custom variants:
https://www.atvxperience.com/download/a ... y-devices/#

Product description:
....
RAM: 2 GB DDR3
....
Which Rom can i install on Beelink Gt1 Standard???

Looks like you posted some Manufactured Specs for your device saying DDR3. That is not the best way to verify RAM, is exactly why I said to open the box to visual verify type. My box said DDR3 from purchase website, when I open the box is actually DDR4. You may have DDR or LPDDR, because these TVbox manufacturers may switch chip suppliers mid-build run.

Try installing the DDR standard version of Adam's firmware builds AtvX_v2G_s912_fixed.img , use Amlogic USB Burning Tool to load firmware, and in the Tool don't Select "Erase Bootloader" - Firmware should load 100% if you have correct RAM version of firmware loaded.

[TrON7777]

Thank You Ricklar for all the informations! Grazie 1000, Happy New Year, Ciao from Italia!

[bladewarrior]

Is there a changelog for v2G A1?

[ricklar]

Are Adams V2G builds the official builds or should we still wait for an official release?

Is V2G an upgrade on the V2F build or the V2FF build?
- we know that v2ff was very different (uboot etc.), so I'd like to know if this was the base, or if the v2ff base was scrapped and the v2f base upgraded.

v2g is v2ff, but better with wifi drivers and other little bug fixes.
Amazon prime is a problem I couldn't fix because cannot reproduce the bug. Need proper logs for that.

Hi,

I had v2FF installed in H96 Pro+, the Bluetooth didn't work, tried the QC9377_BT_Fix.zip that [mention]Ico747[/mention] posted. Still Bluetooth didn't work.

So installed Adam's build = atvXperience_V2G_S912_FIXED.img
I installed without Wiping Data, straight on top of v2FF.
Now Bluetooth worked, used firmware for a couple days, everything seemed working good. One major issue for me that the v2G seemed to fix was the streaming, I get pixel artifacts or small errors like video stream pausing while audio continues with v2FF. Also when loading a YouTube video in v2FF the video has trouble loading and pixel artifacts show up on screen. Noticed in AIDA64 app that with v2G now makes my box says it has only 2GB ram, have the v3 pcm board for H96 Pro+ 3GB/32GB with DDR4. So I then started looking and digging into v2G to see some the changes:

1) init.d scripts are changed, maybe for the better, v2G has less scripts installed
and different scripts to v2FF. v2FF has some duplicate scripts, I deleted about 4 or 5 duplicates if I remember correct.

2) build.prop tweaks are not added in v2G, is a more stock looking build.prop. Two codes that were v2G and not in v2FF:
#
ro.sf.full_activemode=false
ro.amazon.fosflags=1
#
Don't know if those actually help or not. I have an edited build.prop will post when I get chance.

With my Ram issue now showing my box is 2GB Ram, I tried installing the other versions from Adam's builds the DDR4/LPDDR and 9377_only builds, neither would boot up, waited the required 5-10 minutes after install to see if they would start up but sadly no. So sadly went back to v2FF.

Any thoughts about combining the tweaks in Adam's v2G and releasing an official v2G anytime soon?

What would cause the ram from changing like it did?

[onexzero]

V2G_DDR4_LPDDR_FIXED.IMG flashed successfully but does not boot.