H96 pro Plus: from 3 giga Ram to 1 giga RAM !!

H96 Pro, X98 Pro, TX9 Pro to name a few...
Post Reply
gracco
Verified Member
Posts: 35
Joined: Sun Nov 04, 2018 6:51 pm
Has thanked: 2 times

H96 pro Plus: from 3 giga Ram to 1 giga RAM !!

Post by gracco » Sat Dec 01, 2018 2:29 pm

even this DDR4 firmware not works on my box... :(

bumerc
Moderator
Posts: 118
Joined: Tue Oct 02, 2018 6:19 pm
Has thanked: 3 times
Been thanked: 10 times

Post by bumerc » Sat Dec 01, 2018 2:57 pm

gracco wrote:
Sat Dec 01, 2018 2:29 pm
even this DDR4 firmware not works on my box... :(
Wait for update

gracco
Verified Member
Posts: 35
Joined: Sun Nov 04, 2018 6:51 pm
Has thanked: 2 times

Post by gracco » Sat Dec 01, 2018 3:22 pm

Ok i hope soon .....Update solve even NO signal on HDMI port?

bumerc
Moderator
Posts: 118
Joined: Tue Oct 02, 2018 6:19 pm
Has thanked: 3 times
Been thanked: 10 times

Post by bumerc » Sun Dec 02, 2018 1:03 pm

gracco wrote:
Sat Dec 01, 2018 3:22 pm
... NO signal on HDMI port?
There can be several causes
- u-boot hdmimode != display_mode_default (in dtb)
- defective HDMI cable
- Old TV set, resolution only = <720p
...
...

If this is the first point, this will be fixed with the update.

gracco
Verified Member
Posts: 35
Joined: Sun Nov 04, 2018 6:51 pm
Has thanked: 2 times

Post by gracco » Sun Dec 02, 2018 3:12 pm

I think the the first point.

when do you think to upload new update?

User avatar
ricklar
Verified Member
Posts: 22
Joined: Fri Nov 30, 2018 10:30 pm
Has thanked: 4 times
Been thanked: 1 time

Post by ricklar » Mon Dec 03, 2018 2:16 am

gracco wrote:
Sat Dec 01, 2018 7:22 am
is it the same of mine

board version: S32-V3(DDR4)

can you link stock firmware for me?
Here is link to stock firmwares I got from forum.freaktab.com

https://mega.nz/#F!8qhRRaYJ!2ZA3VLjvLT6wg0IwsTF27g

I personally used the V3-SHMOD version after bricking my H96 PRO+ device before.

I would recommend using the most recent date version of stock firmware, and then if you do have problems, precede by rolling back to older ones if that doesn't work.

bumerc
Moderator
Posts: 118
Joined: Tue Oct 02, 2018 6:19 pm
Has thanked: 3 times
Been thanked: 10 times

Post by bumerc » Mon Dec 03, 2018 1:31 pm

gracco wrote:
Sun Dec 02, 2018 3:12 pm
I think the the first point.

when do you think to upload new update?
Maybe today or tomorrow

gracco
Verified Member
Posts: 35
Joined: Sun Nov 04, 2018 6:51 pm
Has thanked: 2 times

Post by gracco » Mon Dec 03, 2018 8:07 pm

:) I hope

bumerc
Moderator
Posts: 118
Joined: Tue Oct 02, 2018 6:19 pm
Has thanked: 3 times
Been thanked: 10 times

Post by bumerc » Mon Dec 03, 2018 8:45 pm


gracco
Verified Member
Posts: 35
Joined: Sun Nov 04, 2018 6:51 pm
Has thanked: 2 times

Post by gracco » Mon Dec 03, 2018 9:38 pm

bumerc wrote:
Mon Dec 03, 2018 8:45 pm
atvx_s912_DDR4_only_2ff.zip
Very very thks...i tests now it

Post Reply