Hi can we have some tutorial to make that ?
Is V2G_S912_DDR4-LPDDR_Final.img works on lpddr3?
- ricklar
- Moderator
- Posts: 889
- Joined: Fri Nov 30, 2018 10:30 pm
- Has thanked: 139 times
- Been thanked: 249 times
Click for Tutorial link CLICK HERE
BE KIND, BE NICE, BE RESPECTFUL TO OTHERS, RESPECT THE MODERATORS,
*IMPORTANT NOTE* ONLY PM MODERATORS OR DEVELOPERS AS A LAST RESORT!!!
My test device: H96 Pro+ 3gb/32gb DDR4 Plus own Tanix, Beelink, Alfawise, X96S, Odroid-N2, Khadas VIM3L, X3, ADT-3, X96-Air
GEARBEST.com
PLEASE ENJOY ATVX!
*IMPORTANT NOTE* ONLY PM MODERATORS OR DEVELOPERS AS A LAST RESORT!!!
My test device: H96 Pro+ 3gb/32gb DDR4 Plus own Tanix, Beelink, Alfawise, X96S, Odroid-N2, Khadas VIM3L, X3, ADT-3, X96-Air
GEARBEST.com
PLEASE ENJOY ATVX!
No USB2TTL Converter i havebumerc wrote: ↑Thu Jan 10, 2019 6:03 pmno, a log from the uart console is needed.onexzero wrote:Thanks for reply.
Dmesg of original firmware could help?
https://mega.nz/#!MVd0hSQT!LschZ1sqSrbp ... nBjayXOYs
So ordered one today
-
- Verified Member
- Posts: 17
- Joined: Fri Jan 04, 2019 9:49 pm
<quote>
Try the v2G_s912_A1_fixed.img that should work with LPDDR.
I believed one time that I bricked my H96 Pro+ like you said for your device. But, I was wrong. Situation was LED comes on when plugged to computer with USBa-USBa cable but box would not show in Amlogic Burn Tool. Problem is box needs more power then just USB connection and proper sequence of connecting cables.
</quote>
Thanks for the suggestion but it didn't work as I'd hoped. I am in a situation where with the 5v the box comes on (white led glows) BUT the SPDIF port lights up only when the USB power is supplied. I am curious as to what the image I flashed did to the box ... I am curious, did it install some booting code that says, I dislike the memory in the device or did it simply screw up the emmc 32G storage structure? Thoughts
Try the v2G_s912_A1_fixed.img that should work with LPDDR.
I believed one time that I bricked my H96 Pro+ like you said for your device. But, I was wrong. Situation was LED comes on when plugged to computer with USBa-USBa cable but box would not show in Amlogic Burn Tool. Problem is box needs more power then just USB connection and proper sequence of connecting cables.
</quote>
Thanks for the suggestion but it didn't work as I'd hoped. I am in a situation where with the 5v the box comes on (white led glows) BUT the SPDIF port lights up only when the USB power is supplied. I am curious as to what the image I flashed did to the box ... I am curious, did it install some booting code that says, I dislike the memory in the device or did it simply screw up the emmc 32G storage structure? Thoughts