Download fails for atvXperience_S912_V2H_T95Z_FINAL.img

[arthng]

Downloads fails for

atvXperience_S912_V2H_T95Z_FINAL.img
and atvXperience_S912_V2H_FINAL.img

Download ok for
atvXperience_S905X_V2H_FINAL.img

[arthng]

Update

Download for atvXperience_S912_V2H_T95Z_FINAL.img and
atvXperience_S912_V2H_FINAL.img starts and stops. Speed is slow and variable while
downloading. Eventually it completes.
However, unable to flash android box with the downloaded img file. (T95Z plus - successfully flashed with previous versions)

Download for atvXperience_S905X_V2H_FINAL.img starts and completes at a consistent speed.
Android box flash with img file successful. (QBox 2GB)

[ricklar]

[mention]arthng[/mention] What box do you have?

The T95Z comes in different variants: PLUS or MAX, DDR3 or LPDDR3

I believe the file for download is for the T95Z MAX.

Try this modification for LPDDR3 devices:

Test:
lpddr3_v2h

Install with:
Amlogic Burning Tool
or
SDcard - Burn Card Marker Tool

The option "Erase Bootloader" must be checked.

[arthng]

Thanks for the reply.

I use burn card maker and check all the boxes every time.
The problem in my opinion is likely to be a file download issue. Download starts and stops repeatedly for some reason.

I flash back to atvXperience_v2F_s912 and the box works great. Also had no problem flashing other versions before V2H.

[Senn Dawg]

I hope this is not a problem, but, I have a T95Z plus and it stops at the boot and wont go any further is that bricked ? And is the wifi problem fixed in the firmware?

[bumerc]

I hope this is not a problem, but, I have a T95Z plus and it stops at the boot and wont go any further is that bricked ? And is the wifi problem fixed in the firmware?

Does it stop at the bootlogo? Which RAM memory type is this?

[Senn Dawg]

It is 2gb/16 and yes it stops at the boot logo

[bumerc]

Replace the atvX DTB file with the original DTB file and try again.

[Senn Dawg]

I have the T95Z PLUS Android 7.1 TV BOX, Amlogic S912 Octa Core 2GB RAM 16GB ROM Support Dual WiFi 2.4G/5GHz 1000M LAN BT 4.0 UHD 4K 3D Smart TV Box and I was wondering wich furm ware would be good for it

[bumerc]

I have the T95Z PLUS Android 7.1 TV BOX, Amlogic S912 Octa Core 2GB RAM 16GB ROM Support Dual WiFi 2.4G/5GHz 1000M LAN BT 4.0 UHD 4K 3D Smart TV Box and I was wondering wich furm ware would be good for it

And I asked for the RAM type, so I can tell you what firmware you can install. All other data are unimportant for the FW selection first. Otherwise it says afterwards, I have bricked up my device etc .. Do you have a DDR3 or a LPDDR3 RAM?