Amazon Prime problems

[kick]

Hi, I have the following: HK1 TV Box (Android 7.1) with 2GB RAM 16GB ROM Amlogic S905W Quad Core A53 64 Bits, Supporting 4K (60Hz) Full HD/3D/H.265/WiFi 2.4GH.

For some reason it locked up on me last week and I couldn't get to the recovery screen so I took a chance on flashing V2FF via USB method and it worked perfectly!

Weird I have the same box and it did the exact same thing right around the same time.
Mostly just sits there with the Red power light showing, if it gets tot he Blue light the screen just stays at the MBOX logo.

I was trying to find the firmware for this box to flash it when I stumbled on your post. Other than the Amazon issue, is V2F worth installing? Hoping to resurrect my HK1.

Absolutely worth it for me as I couldn't get past the MBOX logo either, no matter what I tried. I flashed with the most recent firmware for S905W (V2FF not V2F) using USB method with male to male cable and it revived my box. I find the atvXperience UI to be better than the stock firmware that was on this box. Note that I haven't tested everything but wifi, and the apps I need, work perfectly. I believe the atvXperience team are aware of the Prime Video issue and are working on it, so that may get solved in the near future too.

[stef07]

Hi,
I've installed the Firmware on a Bolv S912 and it works well.
I've an issue with Amazon Prime Video - Android TV. When I try to play a film, it starts to buffer a bunch of time and then it stop saying "internet connection not available".
Have you any hints about? I can provide debug logs, if you tell me how gather them.

[Nayam]

Hi,
I've installed the Firmware on a Bolv S912 and it works well.
I've an issue with Amazon Prime Video - Android TV. When I try to play a film, it starts to buffer a bunch of time and then it stop saying "internet connection not available".
Have you any hints about? I can provide debug logs, if you tell me how gather them.

This is a drm issue, team contacted amazon and they said they're restricting the app to certified devices only.

[diback]

Amazon confirmed that they're restricting their app only to work in certified devices.
Anybody can confirm this? Can you run amazon prime in stock firmwares?

Yes Prime Video working fine on Stock Rom x96 mini 7.12 (http://www.filefactory.com/file/2mmv4at ... INI%20.rar)

[earth08]

Dear,
I downloaded the latest prime video from aptoide and its working on minim8s2 s905c

[ricklar]

Dear,
I downloaded the latest prime video from aptoide and its working on minim8s2 s905c

S905C???
So you are using a stock firmware TVbox?

I believe because the AtvX firmware is androidTV OS, that the Amazon apk is doing device checks and reading TV OS present that it looks for DRM L1, which all factory certified TV OS devices contain. Which is why in a stock firmware tv box with basic(mobile) android OS the mobile Prime Video apks will run with only DRM L3.

[Parsival]

Mini M8s II is a S905X... I have 2 of these

[earth08]

Sorry typing mistake
Mini M8s2 s905x

[warrior666]

I have 2 box X96 with S905X, on one with stock firmware Prime is ok, the other with atvxperience firmware, Prime app try to start the video and stucks. It says me there isn't enough band, i try connect with lan cable but same. On both devices i check drm widevine, both have L3 security. So the problem is in the os i think.

[Nayam]

I have 2 box X96 with S905X, on one with stock firmware Prime is ok, the other with atvxperience firmware, Prime app try to start the video and stucks. It says me there isn't enough band, i try connect with lan cable but same. On both devices i check drm widevine, both have L3 security. So the problem is in the os i think.

This is certainly a problem either with esn or something else, I'll try my best to make it work in v3