[phpBB Debug] PHP Warning: in file [ROOT]/ext/spaceace/ajaxchat/controller/chat.php on line 220: Trying to access array offset on value of type bool [DISCUSSION] Sunvell T95Z Max TV Box - Page 14 - atvXperience : The Forum
Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Previously I used usb cable as a power source, now I 'm used normal power source and flashinh is diffrent, but stops upgrading too https://pastebin.com/22gXSbnb
etzka wrote: ↑Sun Nov 25, 2018 5:24 pm
Previously I used usb cable as a power source, now I 'm used normal power source and flashinh is diffrent, but stops upgrading too https://pastebin.com/22gXSbnb
Replace the * .ini file on the SD card with the one from the archive.
Rename atvx_s912_LPDDR_v2ff.img to aml_upgrade_package.img
etzka wrote: ↑Sun Nov 25, 2018 5:24 pm
Previously I used usb cable as a power source, now I 'm used normal power source and flashinh is diffrent, but stops upgrading too https://pastebin.com/22gXSbnb
Replace the * .ini file on the SD card with the one from the archive.
Rename atvx_s912_LPDDR_v2ff.img to aml_upgrade_package.img
1. Download the new bootloader
2. Copy u-boot.bin to the SD card (Fat32 partition)
- The following must now be present on the SD card:
aml_upgrade_package.img
aml_sdc_burn.ini
aml_sdc_burn.UBOOT
u-boot.bin
3. Open the uboot-terminal (gxm_q201_v1#) and type the following commands: