H96 pro Plus: from 3 giga Ram to 1 giga RAM !!

H96 Pro, X98 Pro, TX9 Pro to name a few...
Post Reply
gracco
Verified Member
Posts: 48
Joined: Sun Nov 04, 2018 6:51 pm
Answers: 0
Has thanked: 3 times

#41

bumerc
Administrator & Developer
Posts: 1551
Joined: Tue Oct 02, 2018 6:19 pm
Answers: 0
Has thanked: 211 times
Been thanked: 334 times

#42

Would work, but there are also cheaper alternatives :)
gracco
Verified Member
Posts: 48
Joined: Sun Nov 04, 2018 6:51 pm
Answers: 0
Has thanked: 3 times

#43

Can you says me one that sure works?
Send me a link, please?


Please keep the topic clean, edit your posts if you forgot something
:)
bumerc
Administrator & Developer
Posts: 1551
Joined: Tue Oct 02, 2018 6:19 pm
Answers: 0
Has thanked: 211 times
Been thanked: 334 times

#44

Converters with CP2102 work perfectly, buy any of them
gracco
Verified Member
Posts: 48
Joined: Sun Nov 04, 2018 6:51 pm
Answers: 0
Has thanked: 3 times

#45

Converters with CP2102 better with 4, 5 or 6 pin?
bumerc
Administrator & Developer
Posts: 1551
Joined: Tue Oct 02, 2018 6:19 pm
Answers: 0
Has thanked: 211 times
Been thanked: 334 times

#46

It does not matter, it is important that the connections TX, RX, GND are present. I use this one
gracco
Verified Member
Posts: 48
Joined: Sun Nov 04, 2018 6:51 pm
Answers: 0
Has thanked: 3 times

#47

i have just ordered usb converter now perhaps in have update with CoreELEC-S912.arm-8.95.6-S912 and works only with this dtb files gxm_q201_1g.dtb and always without HDMI signal.
all with dualboot on SD.
bumerc
Administrator & Developer
Posts: 1551
Joined: Tue Oct 02, 2018 6:19 pm
Answers: 0
Has thanked: 211 times
Been thanked: 334 times

#48

gracco wrote: Sat Dec 08, 2018 11:53 am i have just ordered usb converter now perhaps in have update with CoreELEC-S912.arm-8.95.6-S912 and works only with this dtb files gxm_q201_1g.dtb and always without HDMI signal.
all with dualboot on SD.
I'm still waiting for the UART log. It’s either due to the wrongly configured DDR timing in the u-boot code, or the power supply is defective.
gracco
Verified Member
Posts: 48
Joined: Sun Nov 04, 2018 6:51 pm
Answers: 0
Has thanked: 3 times

#49

Hi, tomorrow will arrive uart converter, to make log i must use putty's software? Can you says to me ...step to step ?
Regards
bumerc
Administrator & Developer
Posts: 1551
Joined: Tue Oct 02, 2018 6:19 pm
Answers: 0
Has thanked: 211 times
Been thanked: 334 times

#50

Post Reply