And write that into the kernel command line..? This is the part of the uboot environment, defined in initargs, and passed to kernel command line at boot time.
[DISCUSSION] Sunvell T95Z Max TV Box
-
- Experienced Member
- Posts: 99
- Joined: Sat Sep 15, 2018 11:10 am
- Has thanked: 1 time
- Been thanked: 4 times
I do nothing more than you suggested, no modification from my own.
Sometimes when after automatic reboot, view appiers on 1/4 off screen, I change resulution from 4k 60hz to 4k 50hz and vice versa in android settings, and screen view fixed for some time
-
- Administrator & Developer
- Posts: 1551
- Joined: Tue Oct 02, 2018 6:19 pm
- Has thanked: 211 times
- Been thanked: 334 times
I get a test device with the front display very soon, then I do it. Because of HDMI resolution, I have to make a few considerations, unfortunately I have no 4k TV to test it extensively. To use the original remote control switch off the CEC control.etzka wrote: ↑Sun Dec 02, 2018 11:53 am This is with issues too. When I power off tv with original tv IR remote, box sleep too, but when I power on tv, box dont wake up. I have 3 or 4 times plug box power to boot normaly, without stuck. Airmouse work some time(sleep, wakeup, but afterall just stop worked)
First two booting with stuck https://pastebin.com/Lf0eR2Ub
https://pastebin.com/Nb1wVwnZ
Third time box booted automaticaly into twrp recovery, then from there I restarted into system.
Besides that, there would be good, if original box IR remote able to work, and led clock etc
-
- Experienced Member
- Posts: 99
- Joined: Sat Sep 15, 2018 11:10 am
- Has thanked: 1 time
- Been thanked: 4 times
[mention]bumerc[/mention] I think, the main problem is with hdmi resolution on 4k tv. After succsesfully box restart videos plays normaly, but when I close video player( kodi, vlc, youtube and others), screen goes black for second, and then goes back to android UI. The second time to play videos in thesse apps, there were problem, screen goes black, system freezes. All this would not be, if I after first sucsesfully video playing, change android resolution to 4k 60hz from 4k 50hz, or vice versa, or other resolution. After that video plays normaly without system freezes. After system freezes, its hard to restart system,
from the fourth ot fifth time only succeeds to restart normally without stuck on atvx logo.
from the fourth ot fifth time only succeeds to restart normally without stuck on atvx logo.
-
- Experienced Member
- Posts: 99
- Joined: Sat Sep 15, 2018 11:10 am
- Has thanked: 1 time
- Been thanked: 4 times
even if I set resolution to 1080p 60hz, box freezes at some point, a lot off times per day. After freezing I have hard time to start box normally.
If system resolution is set to 1080p, when I watch video with 4k resolution, box show 4k or 1080p resolution that file?
If system resolution is set to 1080p, when I watch video with 4k resolution, box show 4k or 1080p resolution that file?
-
- Administrator & Developer
- Posts: 1551
- Joined: Tue Oct 02, 2018 6:19 pm
- Has thanked: 211 times
- Been thanked: 334 times
Box Freezes - The problem is with the Preemptible kernel (CONFIG_PREEMPT) used in atvx-image. Ask @Nayam if this feature can be turned off in the next build.etzka wrote: ↑Sun Dec 16, 2018 7:56 pm even if I set resolution to 1080p 60hz, box freezes at some point, a lot off times per day. After freezing I have hard time to start box normally.
If system resolution is set to 1080p, when I watch video with 4k resolution, box show 4k or 1080p resolution that file?
Regarding 4k resolution - that would work.
Hi Nayam, I have a new T95Z plus (2/16) with LPDDR3. V2FF LPDDR3 bricked my machine although it was successfully burned via USB. The other V2FF version wouldn't go beyond 2%.
There are four V2G images from Adam's personal builds. I didn't see one specifically labeled for LPDDR3 so I tried flashing the atvXperience_V2G_S912_DDR4-LPDDR_FIXED.img and again the burning tool said success, but the box also became bricked and nothing showed on the tv when I plugged it in. I had to short pins in order to get the PC to recognize the box so I could re-install stock firmware.
I also tried atvXperience_V2G_S912_FIXED.img and it didn't go beyond 2% either. There are a couple more S912 V2G files but I'm hesitant to try. Do you know if either of those apply to the LPDDR3 box?
Not sure what to try next. Any suggestions are welcome and appreciated.
There are four V2G images from Adam's personal builds. I didn't see one specifically labeled for LPDDR3 so I tried flashing the atvXperience_V2G_S912_DDR4-LPDDR_FIXED.img and again the burning tool said success, but the box also became bricked and nothing showed on the tv when I plugged it in. I had to short pins in order to get the PC to recognize the box so I could re-install stock firmware.
I also tried atvXperience_V2G_S912_FIXED.img and it didn't go beyond 2% either. There are a couple more S912 V2G files but I'm hesitant to try. Do you know if either of those apply to the LPDDR3 box?
Not sure what to try next. Any suggestions are welcome and appreciated.
-
- Administrator & Developer
- Posts: 1263
- Joined: Mon Jun 11, 2018 11:58 pm
- Has thanked: 192 times
- Been thanked: 434 times
- Contact:
I honestly can't tell you much since I don't have that box.kick wrote: ↑Sun Dec 23, 2018 1:34 pm Hi Nayam, I have a new T95Z plus (2/16) with LPDDR3. V2FF LPDDR3 bricked my machine although it was successfully burned via USB. The other V2FF version wouldn't go beyond 2%.
There are four V2G images from Adam's personal builds. I didn't see one specifically labeled for LPDDR3 so I tried flashing the atvXperience_V2G_S912_DDR4-LPDDR_FIXED.img and again the burning tool said success, but the box also became bricked and nothing showed on the tv when I plugged it in. I had to short pins in order to get the PC to recognize the box so I could re-install stock firmware.
I also tried atvXperience_V2G_S912_FIXED.img and it didn't go beyond 2% either. There are a couple more S912 V2G files but I'm hesitant to try. Do you know if either of those apply to the LPDDR3 box?
Not sure what to try next. Any suggestions are welcome and appreciated.
I'll ask Adam bout this.
Last edited by em3ka on Sun Dec 23, 2018 2:00 pm, edited 1 time in total.
Reason: double quote
Reason: double quote
BE NICE, BE RESPECTFUL
RESPECT THE MODERATORS
PM ONLY WHEN IMPORTANT
ENJOY! My Devices:
X96 Mini, A95X Pro, H96 Pro Stick, A95X Max
RESPECT THE MODERATORS
PM ONLY WHEN IMPORTANT
ENJOY! My Devices:
X96 Mini, A95X Pro, H96 Pro Stick, A95X Max