[HELP] Weird S905 A95X box - No display but working

[lindi909]

the same thing happened to my box only blue light and it didnt boot, what i did is ,i connected my box with usb male to male with my pc , the plugged into the power too, then i short pinned it, once it got recognized by the pc i flashed the collio rom on it and it works like a charm.

[clocks1985]

After reading this thread, i still don't get how I got to flash and work on my Qbox S905 box while so many failed.did the other boxes have different bootloaders etc? when V3 is released, maybe more people can enjoy this ROM.

[lindi909]

After reading this thread, i still don't get how I got to flash and work on my Qbox S905 box while so many failed.did the other boxes have different bootloaders etc? when V3 is released, maybe more people can enjoy this ROM.

if i were you would wait for v3 since beta might brick your box

[clocks1985]

Maybe I should have wrote it clearly, the beta ROM is working on my Qbox. You do know the ROM is based on Ugoos AM2 firmware? on my Qbox the AM2 firmware installs but there is no ethernet. but WiFi works (maybe because the AM2 doesn't have an ethernet port) and my box has the ap6330 WiFi chip.but then again V3 may brick my box and work on others? but the only way to know is to open your box and see what board it is, and check if the bootloader and WiFi chip etc is the same.

[vl85nick]

Here found link to stock (factory) firmware: Nexbox A95X S905 box

https://www.mediafire.com/download/3tnl ... X-A95X.zip

[Nayam]

Here found link to stock (factory) firmware: Nexbox A95X S905 box

https://www.mediafire.com/download/3tnl ... X-A95X.zip

Thanks I'll try it out

[hellfire1980]

[mention]Nayam[/mention] ,

I have a beelink mxiii box. Is it possible to port it by using existing rom from v2h? Any tutorial or guide on how to do the porting?

[Nayam]

[mention]Nayam[/mention] ,

I have a beelink mxiii box. Is it possible to port it by using existing rom from v2h? Any tutorial or guide on how to do the porting?

First and foremost is reading usb burning tool fixing guide #6

[Nayam]

Here found link to stock (factory) firmware: Nexbox A95X S905 box

https://www.mediafire.com/download/3tnl ... X-A95X.zip

Nope, didn't work, this Device looks faulty

[SrWladimir]

This will sound stupid, but you can try if you don't have anything to lose,
If you have a Heat gun, try to use it on the MOBO for a 15 seconds..
I say this because happened to me on various hardware that GPU soldering is not well made and it makes it power on but no video output or powers on but can't boot because of the GPU.
Again, only try this at last option and if you don't have anything to lose.
If you will try this, take off any plastic part and any heatsink.