[HELP] need help on tx3 mini brick

TX3 Mini, X96 Mini, W95 to name a few...
Post Reply
northenlight
Verified Member
Posts: 11
Joined: Sat Aug 03, 2019 3:40 pm
Answers: 0
Has thanked: 7 times

#1

I think my box is brick its alway show black screen and lcd always show “boot” red led is show at back
I try to flash with usb burning tool its error with code 0x32030201 uboot get result disk initial error
So i make burncard and try too boot it always black screen and not respond
I use firmware in this forumviewtopic.php?f=2&t=582&start=20

thank for help and sorry for bad english ':)
this is my box board
Image Image Image
Top
User avatar
em3ka
Moderator
Posts: 1835
Joined: Sun Jul 15, 2018 11:43 am
Answers: 0
Has thanked: 108 times
Been thanked: 370 times

#2

You have newest TX3 mini box with different RAM - revision 1.3 motherboard.
Flash only this rom from 4PDA (atvX v2H .img or .zip) 📌
https://4pda.ru/forum/index.php?showtop ... ry86559322
Top
northenlight
Verified Member
Posts: 11
Joined: Sat Aug 03, 2019 3:40 pm
Answers: 0
Has thanked: 7 times

#3

[mention]em3ka[/mention]thank you sir i will try
is this link right?http://4pda.ru/forum/index.php?showtopic=910528&st=120 your link doesnt work
so i download and flash with burnning tool? and this gonna show error uboot like before
sry for a lot of question ':)
Top
User avatar
em3ka
Moderator
Posts: 1835
Joined: Sun Jul 15, 2018 11:43 am
Answers: 0
Has thanked: 108 times
Been thanked: 370 times

#4

northenlight wrote: ↑Sun Aug 04, 2019 7:06 am your link doesnt work (corrected now)
so i download and flash with burnning tool? and this gonna show error uboot like before
FW is for rev1.3 motherboard, should work... 👍
Top
northenlight
Verified Member
Posts: 11
Joined: Sat Aug 03, 2019 3:40 pm
Answers: 0
Has thanked: 7 times

#5

em3ka wrote: ↑Sun Aug 04, 2019 7:40 am
northenlight wrote: ↑Sun Aug 04, 2019 7:06 am your link doesnt work (corrected now)
so i download and flash with burnning tool? and this gonna show error uboot like before
FW is for rev1.3 motherboard, should work... 👍
its error at u boot again :')
Top
bumerc
Administrator & Developer
Posts: 1551
Joined: Tue Oct 02, 2018 6:19 pm
Answers: 0
Has thanked: 211 times
Been thanked: 334 times

#6

em3ka wrote: ↑Sun Aug 04, 2019 5:25 am You have newest TX3 mini box with different RAM - revision 1.3 motherboard.
..
Not quite, new 1.3 boards are equipped with MLC NAND, atvX bootloader and kernel do not support this variant due to lack of appropriate drivers. Therefore "disk initial error"
Top
northenlight
Verified Member
Posts: 11
Joined: Sat Aug 03, 2019 3:40 pm
Answers: 0
Has thanked: 7 times

#7

bumerc wrote: ↑Sun Aug 04, 2019 7:53 am
em3ka wrote: ↑Sun Aug 04, 2019 5:25 am You have newest TX3 mini box with different RAM - revision 1.3 motherboard.
..
Not quite, new 1.3 boards are equipped with MLC NAND, atvX bootloader and kernel do not support this variant due to lack of appropriate drivers. Therefore "disk initial error"
what can i do now ':) :confounded:
Top
northenlight
Verified Member
Posts: 11
Joined: Sat Aug 03, 2019 3:40 pm
Answers: 0
Has thanked: 7 times

#8

i try 2h with sd boot but now its loop on upgrading screen :')
Top
User avatar
ricklar
Moderator
Posts: 889
Joined: Fri Nov 30, 2018 10:30 pm
Answers: 0
Has thanked: 139 times
Been thanked: 249 times

#9

northenlight wrote: ↑Sun Aug 04, 2019 8:06 am i try 2h with sd boot but now its loop on upgrading screen :')
Find the Tanix official firmware online for your tvbox and burn that with USB Burning Tool.
BE KIND, BE NICE, BE RESPECTFUL TO OTHERS, RESPECT THE MODERATORS,
*IMPORTANT NOTE* ONLY PM MODERATORS OR DEVELOPERS AS A LAST RESORT!!!
☢️ My test device: H96 Pro+ 3gb/32gb DDR4 ☢️ Plus own Tanix, Beelink, Alfawise, X96S, Odroid-N2, Khadas VIM3L, X3, ADT-3, X96-Air
GEARBEST.com
PLEASE ENJOY ATVX!
Top
northenlight
Verified Member
Posts: 11
Joined: Sat Aug 03, 2019 3:40 pm
Answers: 0
Has thanked: 7 times

#10

ricklar wrote: ↑Sun Aug 04, 2019 4:27 pm
northenlight wrote: ↑Sun Aug 04, 2019 8:06 am i try 2h with sd boot but now its loop on upgrading screen :')
Find the Tanix official firmware online for your tvbox and burn that with USB Burning Tool.
i have try 20180109 and 20171220 it same problem too ':)
Top
Post Reply

Return to “S905W”