[ROM] atvXperience v3wip - TX5 Pro and other devices

MiBox, X96 to name a few...
Post Reply
Kebrapau
Verified Member
Posts: 10
Joined: Tue Jul 09, 2019 6:27 am
Been thanked: 2 times

#81

Hi i'm new here

My device is a Sunvell T95X.
I've flashed the firmware, but I would like to go back to v2.
Since the bluetooth do not work and my remote is not working properly.
Is it possible?
I do not have a USB cable.
Can i do it from a SDCard?

Thanks in advance
User avatar
ricklar
Moderator
Posts: 889
Joined: Fri Nov 30, 2018 10:30 pm
Has thanked: 139 times
Been thanked: 249 times

#82

Kebrapau wrote: Tue Jul 09, 2019 7:07 am My device is a Sunvell T95X.
I've flashed the firmware, but I would like to go back to v2.
Since the bluetooth do not work and my remote is not working properly.
Is it possible?
I do not have a USB cable.
Can i do it from a SDCard?
Yes, can install v2F with SDcard method
BE KIND, BE NICE, BE RESPECTFUL TO OTHERS, RESPECT THE MODERATORS,
*IMPORTANT NOTE* ONLY PM MODERATORS OR DEVELOPERS AS A LAST RESORT!!!

☢️ My test device: H96 Pro+ 3gb/32gb DDR4 ☢️ Plus own Tanix, Beelink, Alfawise, X96S, Odroid-N2, Khadas VIM3L, X3, ADT-3, X96-Air
GEARBEST.com
PLEASE ENJOY ATVX!
Kebrapau
Verified Member
Posts: 10
Joined: Tue Jul 09, 2019 6:27 am
Been thanked: 2 times

#83

ricklar wrote: Tue Jul 09, 2019 8:35 am
Kebrapau wrote: Tue Jul 09, 2019 7:07 am My device is a Sunvell T95X.
I've flashed the firmware, but I would like to go back to v2.
Since the bluetooth do not work and my remote is not working properly.
Is it possible?
I do not have a USB cable.
Can i do it from a SDCard?
Yes, can install v2F with SDcard method
I've tried, with the "toothpick" method but it always boots to the v3. Could you guide me.
Thanks
User avatar
ricklar
Moderator
Posts: 889
Joined: Fri Nov 30, 2018 10:30 pm
Has thanked: 139 times
Been thanked: 249 times

#84

Kebrapau wrote: Tue Jul 09, 2019 10:57 am I've tried, with the "toothpick" method but it always boots to the v3. Could you guide me.
Thanks
Install terminal app and type:

Code: Select all

reboot upgrade
(press enter)
Screen should go black,
Then insert upgrade SDcard.
Pray that works! If it does the SDcard update process should work and install firmware.

Alternatively you can enter Mask Rom mode my shorting the correct eMMC/Nand pins and then insert SDcard and it should also start the burn card process.

PLEASE!!! Review again the online tutorials to make sure you formatted and installed the firmware to SDcard correctly.

But you should really Buy a USBa-2-USBa cable and use AMLogic Burning Tool, it is the best way to install a firmware.
BE KIND, BE NICE, BE RESPECTFUL TO OTHERS, RESPECT THE MODERATORS,
*IMPORTANT NOTE* ONLY PM MODERATORS OR DEVELOPERS AS A LAST RESORT!!!

☢️ My test device: H96 Pro+ 3gb/32gb DDR4 ☢️ Plus own Tanix, Beelink, Alfawise, X96S, Odroid-N2, Khadas VIM3L, X3, ADT-3, X96-Air
GEARBEST.com
PLEASE ENJOY ATVX!
Kebrapau
Verified Member
Posts: 10
Joined: Tue Jul 09, 2019 6:27 am
Been thanked: 2 times

#85

ricklar wrote: Wed Jul 10, 2019 10:09 am
Kebrapau wrote: Tue Jul 09, 2019 10:57 am I've tried, with the "toothpick" method but it always boots to the v3. Could you guide me.
Thanks
Install terminal app and type:

Code: Select all

reboot upgrade
(press enter)
Screen should go black,
Then insert upgrade SDcard.
Pray that works! If it does the SDcard update process should work and install firmware.

Alternatively you can enter Mask Rom mode my shorting the correct eMMC/Nand pins and then insert SDcard and it should also start the burn card process.

PLEASE!!! Review again the online tutorials to make sure you formatted and installed the firmware to SDcard correctly.

But you should really Buy a USBa-2-USBa cable and use AMLogic Burning Tool, it is the best way to install a firmware.
Thanks for your help.
I finally got it.
User avatar
AndreOtani
Posts: 5
Joined: Wed May 29, 2019 3:49 pm

#86

Kebrapau wrote: Tue Jul 09, 2019 7:07 am Hi i'm new here

My device is a Sunvell T95X.
I've flashed the firmware, but I would like to go back to v2.
Since the bluetooth do not work and my remote is not working properly.
Is it possible?
I do not have a USB cable.
Can i do it from a SDCard?

Thanks in advance
Hi. did the wifi work in your tv box with this firmware?
Kebrapau
Verified Member
Posts: 10
Joined: Tue Jul 09, 2019 6:27 am
Been thanked: 2 times

#87

AndreOtani wrote: Fri Jul 12, 2019 6:55 pm
Kebrapau wrote: Tue Jul 09, 2019 7:07 am Hi i'm new here

My device is a Sunvell T95X.
I've flashed the firmware, but I would like to go back to v2.
Since the bluetooth do not work and my remote is not working properly.
Is it possible?
I do not have a USB cable.
Can i do it from a SDCard?

Thanks in advance
Hi. did the wifi work in your tv box with this firmware?

I didn't try it.
lparker
Posts: 6
Joined: Wed Jun 20, 2018 2:24 am
Been thanked: 4 times

#88

Hi guys,

Thanks for the hard work on this! Works perfect on TX5, except for one small bug. After about a day, I'm unable to open settings. When you select the gear cog in the top right, nothing happens. It did work for the first ~24 hours, as I was able to reboot and still open it normally. But when I tested it the second day it just didn't work. Thought it might be something isolated so I flashed it to another TX5 I have with the same result.

Let me know if there's anything I can provide to help find this bug.
nmou88
Posts: 3
Joined: Thu Sep 19, 2019 9:07 pm

#89

Tried with nexbox a95x but wifi and remote control didn't work :confounded: :confounded:

Will try with a mini m8s II and let you know when I have time

;)
wnocella
Posts: 8
Joined: Fri Nov 30, 2018 7:44 am

#90

Hi

I downloaded file from https://download.atvxperience.com/?dir=S905X

Is this latest version (last modified May 25th 2019 at 1:07am) ?

For Installation I burn it with usb burning tool?

Thanks

Stefano
Post Reply