Hi i'm new here
My device is a Sunvell T95X.
I've flashed the firmware, but I would like to go back to v2.
Since the bluetooth do not work and my remote is not working properly.
Is it possible?
I do not have a USB cable.
Can i do it from a SDCard?
Thanks in advance
[ROM] atvXperience v3wip - TX5 Pro and other devices
- ricklar
- Moderator
- Posts: 889
- Joined: Fri Nov 30, 2018 10:30 pm
- Has thanked: 139 times
- Been thanked: 249 times
Yes, can install v2F with SDcard method
BE KIND, BE NICE, BE RESPECTFUL TO OTHERS, RESPECT THE MODERATORS,
*IMPORTANT NOTE* ONLY PM MODERATORS OR DEVELOPERS AS A LAST RESORT!!!
My test device: H96 Pro+ 3gb/32gb DDR4 Plus own Tanix, Beelink, Alfawise, X96S, Odroid-N2, Khadas VIM3L, X3, ADT-3, X96-Air
GEARBEST.com
PLEASE ENJOY ATVX!
*IMPORTANT NOTE* ONLY PM MODERATORS OR DEVELOPERS AS A LAST RESORT!!!
My test device: H96 Pro+ 3gb/32gb DDR4 Plus own Tanix, Beelink, Alfawise, X96S, Odroid-N2, Khadas VIM3L, X3, ADT-3, X96-Air
GEARBEST.com
PLEASE ENJOY ATVX!
- ricklar
- Moderator
- Posts: 889
- Joined: Fri Nov 30, 2018 10:30 pm
- Has thanked: 139 times
- Been thanked: 249 times
Install terminal app and type:
Code: Select all
reboot upgrade
Screen should go black,
Then insert upgrade SDcard.
Pray that works! If it does the SDcard update process should work and install firmware.
Alternatively you can enter Mask Rom mode my shorting the correct eMMC/Nand pins and then insert SDcard and it should also start the burn card process.
PLEASE!!! Review again the online tutorials to make sure you formatted and installed the firmware to SDcard correctly.
But you should really Buy a USBa-2-USBa cable and use AMLogic Burning Tool, it is the best way to install a firmware.
BE KIND, BE NICE, BE RESPECTFUL TO OTHERS, RESPECT THE MODERATORS,
*IMPORTANT NOTE* ONLY PM MODERATORS OR DEVELOPERS AS A LAST RESORT!!!
My test device: H96 Pro+ 3gb/32gb DDR4 Plus own Tanix, Beelink, Alfawise, X96S, Odroid-N2, Khadas VIM3L, X3, ADT-3, X96-Air
GEARBEST.com
PLEASE ENJOY ATVX!
*IMPORTANT NOTE* ONLY PM MODERATORS OR DEVELOPERS AS A LAST RESORT!!!
My test device: H96 Pro+ 3gb/32gb DDR4 Plus own Tanix, Beelink, Alfawise, X96S, Odroid-N2, Khadas VIM3L, X3, ADT-3, X96-Air
GEARBEST.com
PLEASE ENJOY ATVX!
Thanks for your help.ricklar wrote: ↑Wed Jul 10, 2019 10:09 amInstall terminal app and type:(press enter)Code: Select all
reboot upgrade
Screen should go black,
Then insert upgrade SDcard.
Pray that works! If it does the SDcard update process should work and install firmware.
Alternatively you can enter Mask Rom mode my shorting the correct eMMC/Nand pins and then insert SDcard and it should also start the burn card process.
PLEASE!!! Review again the online tutorials to make sure you formatted and installed the firmware to SDcard correctly.
But you should really Buy a USBa-2-USBa cable and use AMLogic Burning Tool, it is the best way to install a firmware.
I finally got it.
- AndreOtani
- Posts: 5
- Joined: Wed May 29, 2019 3:49 pm
Hi. did the wifi work in your tv box with this firmware?Kebrapau wrote: ↑Tue Jul 09, 2019 7:07 am Hi i'm new here
My device is a Sunvell T95X.
I've flashed the firmware, but I would like to go back to v2.
Since the bluetooth do not work and my remote is not working properly.
Is it possible?
I do not have a USB cable.
Can i do it from a SDCard?
Thanks in advance
AndreOtani wrote: ↑Fri Jul 12, 2019 6:55 pmHi. did the wifi work in your tv box with this firmware?Kebrapau wrote: ↑Tue Jul 09, 2019 7:07 am Hi i'm new here
My device is a Sunvell T95X.
I've flashed the firmware, but I would like to go back to v2.
Since the bluetooth do not work and my remote is not working properly.
Is it possible?
I do not have a USB cable.
Can i do it from a SDCard?
Thanks in advance
I didn't try it.
Hi guys,
Thanks for the hard work on this! Works perfect on TX5, except for one small bug. After about a day, I'm unable to open settings. When you select the gear cog in the top right, nothing happens. It did work for the first ~24 hours, as I was able to reboot and still open it normally. But when I tested it the second day it just didn't work. Thought it might be something isolated so I flashed it to another TX5 I have with the same result.
Let me know if there's anything I can provide to help find this bug.
Thanks for the hard work on this! Works perfect on TX5, except for one small bug. After about a day, I'm unable to open settings. When you select the gear cog in the top right, nothing happens. It did work for the first ~24 hours, as I was able to reboot and still open it normally. But when I tested it the second day it just didn't work. Thought it might be something isolated so I flashed it to another TX5 I have with the same result.
Let me know if there's anything I can provide to help find this bug.
-
- Posts: 8
- Joined: Fri Nov 30, 2018 7:44 am
Hi
I downloaded file from https://download.atvxperience.com/?dir=S905X
Is this latest version (last modified May 25th 2019 at 1:07am) ?
For Installation I burn it with usb burning tool?
Thanks
Stefano
I downloaded file from https://download.atvxperience.com/?dir=S905X
Is this latest version (last modified May 25th 2019 at 1:07am) ?
For Installation I burn it with usb burning tool?
Thanks
Stefano